New Caterpillar K Series Wheeled Loaders

Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard Cat 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shut
March 12, 2014 Read time: 3 mins
The new Cat K Series small wheeled loaders are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools
178 Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard CAT 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shutdown system further reduces fuel consumption.

The new K Series models are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools. A new creeper control feature is said by CAT to further improve low speed operations by allowing the operator to adjust maximum ground speed down to 1.6km/h.  An operator-controlled rimpull-control system helps reduce wheel spin and consequent tyre wear, and a front differential lock enhances traction.

The models’ dedicated load-sensing, variable-displacement pumps for the implement and steering systems reduce kilowatt draw for fuel efficiency and improve multifunction performance. The new K Series loaders also incorporate an electronic snubbing feature at end stroke and kick out positions to reduce operating stress. Hydraulic filter service intervals are extended to 2,000 hours.

Optimised Z-bar loader linkage available on the 924K, 930K and 938K is said by CAT to blend the breakout power of Z-bar linkage with the parallel-lift and load-handling characteristics of CAT VersaLink or IT (Integrated Toolcarrier) linkage. The new linkage, available in both standard- and high-lift configurations on the 930K and 938K, accepts pin-on tools, CAT Fusion coupler or a coupler that meets ISO 23727 and is compatible with competitive work tools. The new linkage is designed to work with CAT Performance Series buckets, designed for efficient loading, high fill factors, improved material retention and lowered fuel consumption. The 13tonne 924K, the 14tonne 930K and 16tonne 938K Wheeled Loaders have 2.5m³, 2.7m³ and 3.2m³ bucket capacities respectively.

An all-new operator's station on the K Series models features automatic temperature control, curved front windshield, tilt and telescoping steering column, and a Soft Touch control panel. Kick-out functions for boom lift, boom lower and tilt are standard and easily programmable by pushing and holding a button on the Soft Touch panel.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Loading and hauling machine improvements will boost quarry production
    July 4, 2014
    Major advances are being seen in the market for loading and hauling machines, with manufacturers developing new solutions for the quarry segment in particular- Mike Woof writes Wheeled loaders and rigid chassis dump trucks are key movers in many quarry operations. New develop-ments have seen the introduction of several new models from key players.
    Read More
  • Advanced, low emission, fuel efficient earthmoving
    February 23, 2012
    Manufacturers are rolling out sophisticated machines for the European, North American and Japanese markets - Mike Woof reports. This year has been a pivotal period for the development of advanced, low emission earthmoving machines. During 2011 an array of manufacturers have introduced new models designed to comply with the latest Stage IIIB/Tier 4 Interim emissions regulations introduced for
    Read More
  • Advanced earthmovers now available
    May 10, 2018
    The excavator and wheeled loader segments represent massive sales volumes for manufacturers, so new model development is prioritised - Mike Woof writes. The crawler excavator segment accounts for a substantial portion of total sales of construction machines. With this in mind, it is no surprise that this is a market segment for which manufacturers prioritise a significant proportion of their research and development budgets. Wheeled loaders, while not selling in quite such large numbers as crawler excava
    Read More
  • Intermat launch for more Cat E-series excavators
    April 11, 2012
    Caterpillar is introducing a revised line-up of 20-24 tonne E Series crawler excavators at Intermat 2012. The 320E, 323E and the reduced radius 320E RR adopt the EU Stage IIIB Cat C6.6 ACERTTM engine, providing reduced emissions and fuel consumption savings of up to 11% compared to other D Series models. A wider range of cab seating, including heating and cooling options, comes with the new E Series crawler excavators. Time delay lighting, additional safety handrails and improved serviceability are also sai
    Read More

Highlighted Content