New Caterpillar K Series Wheeled Loaders

Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard Cat 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shut
March 12, 2014 Read time: 3 mins
The new Cat K Series small wheeled loaders are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools
178 Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard CAT 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shutdown system further reduces fuel consumption.

The new K Series models are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools. A new creeper control feature is said by CAT to further improve low speed operations by allowing the operator to adjust maximum ground speed down to 1.6km/h.  An operator-controlled rimpull-control system helps reduce wheel spin and consequent tyre wear, and a front differential lock enhances traction.

The models’ dedicated load-sensing, variable-displacement pumps for the implement and steering systems reduce kilowatt draw for fuel efficiency and improve multifunction performance. The new K Series loaders also incorporate an electronic snubbing feature at end stroke and kick out positions to reduce operating stress. Hydraulic filter service intervals are extended to 2,000 hours.

Optimised Z-bar loader linkage available on the 924K, 930K and 938K is said by CAT to blend the breakout power of Z-bar linkage with the parallel-lift and load-handling characteristics of CAT VersaLink or IT (Integrated Toolcarrier) linkage. The new linkage, available in both standard- and high-lift configurations on the 930K and 938K, accepts pin-on tools, CAT Fusion coupler or a coupler that meets ISO 23727 and is compatible with competitive work tools. The new linkage is designed to work with CAT Performance Series buckets, designed for efficient loading, high fill factors, improved material retention and lowered fuel consumption. The 13tonne 924K, the 14tonne 930K and 16tonne 938K Wheeled Loaders have 2.5m³, 2.7m³ and 3.2m³ bucket capacities respectively.

An all-new operator's station on the K Series models features automatic temperature control, curved front windshield, tilt and telescoping steering column, and a Soft Touch control panel. Kick-out functions for boom lift, boom lower and tilt are standard and easily programmable by pushing and holding a button on the Soft Touch panel.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Heavy duty 560-80handler takes JCB into the high capacity market
    January 6, 2017
    JCB has extended its telescopic handler range, with the addition of a heavy-duty machine that has been designed for tough operating conditions. The 560-80 has a two-stage boom capable of lifting 6,000kg (12,000lb in the US market) with a maximum working height of 8.1m (26’2”), with a 1,750kg (3,750lb for the US) load capacity at full forward reach.
    Read More
  • Heavy duty 560-80handler takes JCB into the high capacity market
    March 3, 2014
    JCB has extended its telescopic handler range, with the addition of a heavy-duty machine that has been designed for tough operating conditions. The 560-80 has a two-stage boom capable of lifting 6,000kg (12,000lb in the US market) with a maximum working height of 8.1m (26’2”), with a 1,750kg (3,750lb for the US) load capacity at full forward reach.
    Read More
  • Asphalt paving design advances
    June 15, 2012
    A diverse array of advanced paver designs is now being offered in the asphalt paving sector – Mike Woof reports With the World of Asphalt and INTERMAT 2012 events having both taken place in recent months, a series of innovations have been introduced for the asphalt paving market. Developments have come to market that widen the array of both US and European asphalt paving systems and all the major manufacturers have developed new pavers and materials feeders to meet the latest emissions requirements. Demand
    Read More
  • Caterpillar introduces productive and powerful compact loader
    August 17, 2015
    Caterpillar is boosting its line of skid steer loaders and compact loaders with four new D Series small-chassis models These units are the latest additions to the firm’s compact track loader (CTL) and skid-steer loader (SSL) ranges. The SSL 226D and 232D and CTL 239D and 249D all incorporate the innovations from larger D Series machines, including a sealed/pressurised cab, electro-hydraulic controls, redesigned lift arms, and an optional display with rear-view camera. All four machines are powered by a
    Read More

Highlighted Content