New Caterpillar K Series Wheeled Loaders

Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard Cat 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shut
March 12, 2014 Read time: 3 mins
The new Cat K Series small wheeled loaders are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools
178 Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard CAT 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shutdown system further reduces fuel consumption.

The new K Series models are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools. A new creeper control feature is said by CAT to further improve low speed operations by allowing the operator to adjust maximum ground speed down to 1.6km/h.  An operator-controlled rimpull-control system helps reduce wheel spin and consequent tyre wear, and a front differential lock enhances traction.

The models’ dedicated load-sensing, variable-displacement pumps for the implement and steering systems reduce kilowatt draw for fuel efficiency and improve multifunction performance. The new K Series loaders also incorporate an electronic snubbing feature at end stroke and kick out positions to reduce operating stress. Hydraulic filter service intervals are extended to 2,000 hours.

Optimised Z-bar loader linkage available on the 924K, 930K and 938K is said by CAT to blend the breakout power of Z-bar linkage with the parallel-lift and load-handling characteristics of CAT VersaLink or IT (Integrated Toolcarrier) linkage. The new linkage, available in both standard- and high-lift configurations on the 930K and 938K, accepts pin-on tools, CAT Fusion coupler or a coupler that meets ISO 23727 and is compatible with competitive work tools. The new linkage is designed to work with CAT Performance Series buckets, designed for efficient loading, high fill factors, improved material retention and lowered fuel consumption. The 13tonne 924K, the 14tonne 930K and 16tonne 938K Wheeled Loaders have 2.5m³, 2.7m³ and 3.2m³ bucket capacities respectively.

An all-new operator's station on the K Series models features automatic temperature control, curved front windshield, tilt and telescoping steering column, and a Soft Touch control panel. Kick-out functions for boom lift, boom lower and tilt are standard and easily programmable by pushing and holding a button on the Soft Touch panel.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Doosan announces the arrival its smallest 300-5 series wheel loader
    April 22, 2015
    INTERMAT sees the birth of Doosan’s latest arrival, the DL300-5 baby wheeled loader, the smallest machine in the South Korean firm’s DL-5 generation. Doosan’s launch of the 300-5 at Intermat comes only a few weeks after it unveiled the largest wheeled loader in the family, the DL550-5. This was also on display at the Paris exhibition. In between are the 350, 420 and 450, says Doosan’s wheeled loader product manager Sebastien Claude. The 300-5 series, which replaces the Stage IIIB DL-3 series launched
    Read More
  • Caterpillar’s new twin drum asphalt compactor
    October 2, 2018
    Caterpillar is introducing a new rubber tyred compactor designed for use on granular materials and all types of asphalt-mix designs. The firm says that its new CW16 pneumatic roller is available as a standard nine-wheel model with a 1754mm compaction width or as an optional 11-wheel model with a 2,132mm compaction width. The CW16 is designed for efficient performance on highways, city streets, county roads, lane additions, industrial sites, overlays, or other mid-size jobs. Depending on ballast used (inclu
    Read More
  • Volvo’s L45H and L50H are fully loaded for all-round performance
    March 16, 2016
    The new L45H and L50H wheel loaders from Volvo Construction Equipment are well balanced machines, built to a solid design that ensures the strongest performance even in confined jobsites. The H-series wheel loaders have Volvo’s Torque Parallel (TP) linkage to deliver high breakout torque and excellent parallel movement throughout the lifting range. A long wheel base, low center of gravity and good weight distribution give the machine superior stability on rough and uneven terrain. A robust, compact d
    Read More
  • Doosan’s DL280-5 wheeled loader fronts the 12-model series
    February 28, 2018
    Doosan’s new DL280-5 wheeled loader is aimed specifically for waste, recycling and general industrial duties. The DL280-5 is the latest unit in the high-performance 12-model wheeled loader range of operating weights from 12-35 tonnes. It also comes as the company celebrates a milestone – 400,000 units sold in Doosan’s 40-year history. The front lift arm of the DL280-5 is powered by a closed centre hydraulic system with a 210 litre/min axial piston pump for maximum hydraulic performance without producing
    Read More

Highlighted Content