New Caterpillar K Series Wheeled Loaders

Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard Cat 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shut
March 12, 2014 Read time: 3 mins
The new Cat K Series small wheeled loaders are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools
178 Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard CAT 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shutdown system further reduces fuel consumption.

The new K Series models are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools. A new creeper control feature is said by CAT to further improve low speed operations by allowing the operator to adjust maximum ground speed down to 1.6km/h.  An operator-controlled rimpull-control system helps reduce wheel spin and consequent tyre wear, and a front differential lock enhances traction.

The models’ dedicated load-sensing, variable-displacement pumps for the implement and steering systems reduce kilowatt draw for fuel efficiency and improve multifunction performance. The new K Series loaders also incorporate an electronic snubbing feature at end stroke and kick out positions to reduce operating stress. Hydraulic filter service intervals are extended to 2,000 hours.

Optimised Z-bar loader linkage available on the 924K, 930K and 938K is said by CAT to blend the breakout power of Z-bar linkage with the parallel-lift and load-handling characteristics of CAT VersaLink or IT (Integrated Toolcarrier) linkage. The new linkage, available in both standard- and high-lift configurations on the 930K and 938K, accepts pin-on tools, CAT Fusion coupler or a coupler that meets ISO 23727 and is compatible with competitive work tools. The new linkage is designed to work with CAT Performance Series buckets, designed for efficient loading, high fill factors, improved material retention and lowered fuel consumption. The 13tonne 924K, the 14tonne 930K and 16tonne 938K Wheeled Loaders have 2.5m³, 2.7m³ and 3.2m³ bucket capacities respectively.

An all-new operator's station on the K Series models features automatic temperature control, curved front windshield, tilt and telescoping steering column, and a Soft Touch control panel. Kick-out functions for boom lift, boom lower and tilt are standard and easily programmable by pushing and holding a button on the Soft Touch panel.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Major improvements for wheeled loaders and excavators
    April 24, 2013
    Excavators and wheeled loaders benefit from new engine technology - Mike Woof reports. Competition is tough in the market for crawler excavators and wheeled loaders. These production machines account for a significant percentage of the entire construction equipment market worldwide and the segment also has the widest array of competing manufacturers. In the past, European, Japanese and US manufacturers dominated this sector but in the last 20 years South Korean companies have built significant market shares
    Read More
  • Wheeled loaders cut cycle times, boost productivity
    February 14, 2012
    With the Tier 4 interim/Stage IIIB emissions requirements due next year, further upgrades will be required for all wheeled loaders sold in Europe and North America.
    Read More
  • Wheeled loaders cut cycle times, boost productivity
    April 4, 2012
    With the Tier 4 interim/Stage IIIB emissions requirements due next year, further upgrades will be required for all wheeled loaders sold in Europe and North America. In the mean time manufacturers are focussing on improvements that cut cycle times, boost productivity and reduce downtime for example. From Doosan comes the DL420 wheeled loader, which takes over from the previous DL400 and is aimed at use in a range of materials-handling work. The DL420 features a 4m3 bucket and is a 22.3tonne machine that
    Read More
  • High performing compact loaders from Kubota and Volvo CE
    April 12, 2018
    The competitive market for compact loaders is seeing new additions Kubota, SDLG and Volvo CE are now offering compact wheeled loaders that deliver more power and performance than earlier generation models. These compact wheeled loaders are intended to carry out a wide range of tasks and can be used for truck loading or stocking purposes, as well as an array of other duties. Tight turning circles mean that the machines are able to operate on small sites, while the units have long wheelbases for their ove
    Read More

Highlighted Content