Chinese bridge resurfacing with new materials

An innovative resurfacing method has been used for a bridge in China, with a sophisticated mix being used to boost wear characteristics The landmark Nanning Bridge in China’s Nanning City has benefited from a complete surface overhaul. The work was carried out recently after the bridge had been in use for around 10 years. The project is of note as it is thought to be the first comprehensive commercial application of graphene- compound rubber modified asphalt technology in a high-class road/bridge surface
December 13, 2018 Read time: 3 mins
The Nanning Bridge has been resurfaced using an innovative additive in the asphalt mix
An innovative resurfacing method has been used for a bridge in China, with a sophisticated mix being used to boost wear characteristics


The landmark Nanning Bridge in China’s Nanning City has benefited from a complete surface overhaul. The work was carried out recently after the bridge had been in use for around 10 years. The project is of note as it is thought to be the first comprehensive commercial application of graphene- compound rubber modified asphalt technology in a high-class road/bridge surface project in the world.

Adding graphene to asphalt improves the durability and sustainability of asphalt road surfaces, making the asphalt less likely to soften in warm temperatures or harden and crack in cold conditions. The additive also reduces road wear, particularly under high loads, by increasing the elasticity and strength of the asphalt.

This is said to be a key technical breakthrough for road surface materials and is claimed to solve the common problem of short surface-longevity seen on highways in China and elsewhere. Another important factor is that this technology is highly cost-efficient, delivering economic benefits.

The new material system has been developed jointly by 5389 Guangxi University and Guangxi Zhenglu Machinery Technology. The latter is a user of 206 Dynapac compaction and paving equipment and has over the past 20 years been responsible for carrying out numerous high-quality projects in China. “We are not only the project contractor, but we are also the construction solution provider in the field,” explained Gui Li Fa, the president of Guangxi Zhenglu.”

Two Dynapac SD2550CS pavers with hydraulically extendable ends (HEE) screeds, six Dynapac CC6200 twin drum rollers and two Dynapac CP275 rubber tyred rollers were used for the resurfacing work at the Nanning Bridge. The working area was for a length of more than 1,000m and a width of 35m.  

The SD2550CS pavers featuring the HEE system were used as this design offers versatility in highway construction work. According to Guangxi Zhenglu Machinery Technology, the machines can be used for large paving widths and can also be adapted for quickly for much narrower paving widths. The firm says that these machines can be employed for paving jobs in the continuous narrowing or widening of bridge ramps, variable sections or widening sections in tunnels or emergency-parking zones on highways. And the design means that there is no need to reassemble the screed, maximising working efficiency.

The screeds allow working widths from 3-14m, while the HEE system allows a maximum working width of 13.75m.

Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Testing highway materials for best performance
    February 23, 2012
    Big increases in traffic mean that today highways are under greater pressure than ever, and materials have to perform to increasingly higher standards. Modern highways, particularly in and around major cities, are tested like never before, and it is essential that surfaces are built to withstand increasing traffic.
    Read More
  • Carlson developing paver range
    October 9, 2015
    US firm Carlson is best known for its screeds, which are used by a wide range of paver manufacturers in the US. However Carlson, part of the Astec Group, is also a manufacturer of asphalt pavers. The firm recently broadened its line up with the addition of another compact paver model, the CP75. This new model shares a number of features with the existing CP100 from Carlson.
    Read More
  • Smarter compaction technology in use in Missouri
    October 2, 2018
    Intelligent compaction and infrared scanning technologies have been used to improve construction quality The Missouri Department of Transportation (MoDOT) carried out a year-long project throughout 2017 to demonstrate the use of intelligent compaction (IC), infrared scanning (IR), and Veta software to improve pavement construction operations. “We were looking for ways to assess quality in asphalt projects,” said Bill Stone, research administrator at MoDOT. “We are working towards better pavements that l
    Read More
  • New developments in asphalt compaction
    June 14, 2019
    New developments in asphalt compaction offer performance gains for contractors, with future innovations being unveiled – Mike Woof writes Advanced asphalt compactors are offering huge gains in performance over previous generation machines. Better working quality and finish is claimed for the latest machines, while future developments will offer sophisticated solutions. The new ARX 91 articulated tandem roller from Ammann is designed as a high productivity compactor that can be used on both thin and t
    Read More

Highlighted Content