Chinese bridge resurfacing with new materials

An innovative resurfacing method has been used for a bridge in China, with a sophisticated mix being used to boost wear characteristics The landmark Nanning Bridge in China’s Nanning City has benefited from a complete surface overhaul. The work was carried out recently after the bridge had been in use for around 10 years. The project is of note as it is thought to be the first comprehensive commercial application of graphene- compound rubber modified asphalt technology in a high-class road/bridge surface
December 13, 2018 Read time: 3 mins
The Nanning Bridge has been resurfaced using an innovative additive in the asphalt mix
An innovative resurfacing method has been used for a bridge in China, with a sophisticated mix being used to boost wear characteristics


The landmark Nanning Bridge in China’s Nanning City has benefited from a complete surface overhaul. The work was carried out recently after the bridge had been in use for around 10 years. The project is of note as it is thought to be the first comprehensive commercial application of graphene- compound rubber modified asphalt technology in a high-class road/bridge surface project in the world.

Adding graphene to asphalt improves the durability and sustainability of asphalt road surfaces, making the asphalt less likely to soften in warm temperatures or harden and crack in cold conditions. The additive also reduces road wear, particularly under high loads, by increasing the elasticity and strength of the asphalt.

This is said to be a key technical breakthrough for road surface materials and is claimed to solve the common problem of short surface-longevity seen on highways in China and elsewhere. Another important factor is that this technology is highly cost-efficient, delivering economic benefits.

The new material system has been developed jointly by 5389 Guangxi University and Guangxi Zhenglu Machinery Technology. The latter is a user of 206 Dynapac compaction and paving equipment and has over the past 20 years been responsible for carrying out numerous high-quality projects in China. “We are not only the project contractor, but we are also the construction solution provider in the field,” explained Gui Li Fa, the president of Guangxi Zhenglu.”

Two Dynapac SD2550CS pavers with hydraulically extendable ends (HEE) screeds, six Dynapac CC6200 twin drum rollers and two Dynapac CP275 rubber tyred rollers were used for the resurfacing work at the Nanning Bridge. The working area was for a length of more than 1,000m and a width of 35m.  

The SD2550CS pavers featuring the HEE system were used as this design offers versatility in highway construction work. According to Guangxi Zhenglu Machinery Technology, the machines can be used for large paving widths and can also be adapted for quickly for much narrower paving widths. The firm says that these machines can be employed for paving jobs in the continuous narrowing or widening of bridge ramps, variable sections or widening sections in tunnels or emergency-parking zones on highways. And the design means that there is no need to reassemble the screed, maximising working efficiency.

The screeds allow working widths from 3-14m, while the HEE system allows a maximum working width of 13.75m.

Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Strabag on the edge with a Dynapac DF145CS paver from Atlas Copco
    June 10, 2015
    When asphalting the inside of the newly raised edge of a water dam, Austrian road construction company Strabag faced a challenge. The paver had to be operated at an angle of between 34-41 degrees with material fed into the hopper from a ledge just 2.8m wide on the edge of the dam. The Waldeck 2 kidney-shaped hydroelectric station is located on a mountaintop about 500m above sea level on Lake Eder in central Germany. The dam, owned by global energy group E.ON, has a perimeter of about 3km. An important pa
    Read More
  • Airport runway rebuild at Bologna
    May 15, 2019
    Rebuilding a runway requires special attention to detail to maximise efficiency and safety Airport runways face special challenges with regard to the loads they carry on a daily basis, particularly when aircraft are landing. A modern jet aircraft will typically land at speeds of around 240-260km/h, with a laden 747 weighing as much as 265tonnes at the end of a long flight. The stresses these large aircraft place on runway surfaces are enormous and not just with the massive impact forces exerted during
    Read More
  • Asphalt resurfacing at Miami International Airport
    February 8, 2012
    Improvements worth US$30 million are being carried out at Miami International Airport. The work includes runway resurfacing with specialist contractors having been brought in to handle the project. This is a busy facility handling some 34 million passengers/year and the work is being carried out over a period of 454 days in all, starting in September 2009 and due to finish in December 2010. The focus of attention is the upgrade to the airport's second longest runway, 8R 26L as well as the adjoining M and N
    Read More
  • Repaving an F1 racing circuit
    January 20, 2025
    The refurbishment of the Shanghai International Formula 1 was completed recently with great success. As an important milestone in the construction of racing facilities and modern high-grade roads in China, the project has attracted attention both inside and outside the industry.
    Read More

Highlighted Content