Skip to main content

Hamm | Self-monitoring in earthworks via Smart Doc

With Smart Doc, Hamm presents an app with which compaction in earthworks can be transparently documented and the result shared with third parties. The lean app was developed in close coordination with building practitioners. The focus here was on the possibility of self-monitoring when it comes to compaction in earthworks. Smart Doc also fulfils the minimum requirements of continuous compaction control (CCC). With an intuitive user interface, the app also creates added value when training new roller operators, as all relevant compaction parameters are visualised in real time on the smartphone.
April 1, 2021 Read time: 4 mins
Hamm's Smart Doc app shows in real time how the compaction of the respective transit develops. For inexperienced operators, it is a great help when it comes to training

With Smart Doc, Hamm is going down new digital paths and offering a handy means of compaction documentation. In brief, Smart Doc is "self-monitoring for everyone". "We pursue two key aims with the app. Firstly, we offer customers who deal with earthwork sites only occasionally a tool with which they can create proof of compaction very easily. Secondly, we support inexperienced roller operators in their daily work with Smart Doc. They often do not have the practical experience of their colleagues, but are familiar with the digital world. The live display on the smartphone visually demonstrates how compaction develops during the current transit. Consequently, high-quality and homogeneous compaction can also be achieved by young roller operators. So they become more experienced in a fun way," explains Dr. Axel Mühlhausen, Product Manager Digital Solutions at Hamm AG.

Hamm's new app, Smart Doc, records the speed, the frequency, the amplitude, the amount of jump operation and the achieved compaction value (Hamm Measurement Value) during compaction
Hamm's new app, Smart Doc, records the speed, the frequency, the amplitude, the amount of jump operation and the achieved compaction value (Hamm Measurement Value) during compaction

Available for H series and H CompactLine series

With Smart Doc, every roller operator of a compactor from the H series or the H CompactLine series can produce a report about compaction. As a prerequisite, the compactors must be equipped with the Hamm Compaction Meter, which many customers are already using anyway. There is also a Bluetooth® interface. This is available as an option for the corresponding model. The compactors of the H CompactLine series should also be equipped with a speedometer and a vibration frequency display. As soon as the app connects the mobile phone with the CAN bus of the roller via Bluetooth®, the current compaction parameters (speed, frequency, amplitude and compaction value) are transmitted to the app. Consequently, the Bluetooth® Low Energy standard ensures extremely energy-efficient data transfer. Should the battery of the mobile phone nevertheless be drained, it can be charged via the 12 V socket or the optional USB charging port on the driver's platform.

Economical alternative to complex continuous compaction control systems in earthworks

The result delivered by the app is a compaction report in PDF format. This shows the essential data on the project and contract section, the technical data of the compactor (weight, drum width and static linear load), the various compaction parameters and the number of transits per compaction lane. The report also contains a graphic that illustrates in which places and how intensively compaction has already taken place.

With the Smart Doc app, a test report can be automatically created and sent as a PDF – an easy but nevertheless reliable and accurate basic proof of continuous compaction control
With the Smart Doc app, a test report can be automatically created and sent as a PDF – an easy but nevertheless reliable and accurate basic proof of continuous compaction control

Smart Doc records data as soon as vibration or oscillation is used during compaction. In order to do so, the load-bearing capacity of the ground is determined by means of an acceleration sensor on the drum during dynamic compaction. The HMV (= Hamm Measurement Value) is used as a measured variable for compaction – a measure of the load-bearing capacity of the substrate during compaction. With real-time visualisation of the compaction data and the option to generate and show a compaction report at any time, Smart Doc fulfils the basic requirements of a continuous compaction control system. In short – with Smart Doc, Hamm offers an economical alternative for achieving high-quality compaction at earthwork sites with the required basic continuous compaction control in a way that can be verified.

Easy operation

Just like the Hamm compactors themselves, the app is also very easy to operate. Once the project data has been entered, the recording can be started and stopped automatically when switching on or off the vibration or oscillation. In addition, every transit and every new track can be individually documented and automatically saved. Once work has finished, the data export is triggered by a tap of the finger. During compaction with vibration or oscillation, the operator can follow the current status live on the smartphone. This representation is highly appropriate for training new personnel, as inexperienced operators can square their perception with the actual compaction result with Smart Doc.

Free

The app is free and can be installed via the Google Play Store on all Android smartphones and tablets from Android 6.0. The app is available in German, English, Spanish and French.


Sponsored content produced in association with WIRTGEN GROUP

For more information on companies in this article

Related Content

  • Benninghoven burners EVO JET
    March 1, 2025
    Benninghoven is a world market leader in burners for asphalt mixing plants and a manufacturer of multi-fuel burners with up to 4 fuels. The complete know-how and wealth of experience from over 70 years of burner competence support the development of unique burners with excellent properties.
  • Powerful and "digital-ready"– HC Series soil compactors by HAMM
    September 22, 2022
    HAMM is introducing the HC series – a new generation of soil compactors for all markets. These compactors achieve a high level of compaction power while simultaneously achieving a reduction in CO2 emissions. The communication capabilities are new: All models in the HC series are "digital-ready" since they can be equipped with various interfaces for the digital construction site.
  • The Path to Climate-Neutral Road Construction
    October 1, 2023
    Machine manufacturers and construction companies around the globe are currently searching for ways to achieve the goal of climate-neutral construction. The challenge here is to successively reduce emissions of CO2 and other harmful gases (summarized to CO2 equivalents: CO2e) around the world to zero over the coming decades. In the road construction sector, this transformation is inextricably linked to the improvement and further development of production and working processes. In the future, machines and construction materials will also be assessed based on the climate-harmful emissions arising from their production and use. However, the focus should not be on individual machines, but on the entire process leading up to the finished product – a road. Ultimately, the decisive factor is the emissions generated per kilometer of newly built or rehabilitated road – the “CO2e per work done”.
  • Infrastructure stays strong on the road to recovery
    July 1, 2021
    After more than a year of uncertainty, the road industry is coming back stronger than ever before thanks to new ways of working and increased investment – because building new infrastructure lays the foundation for a more resilient and economically robust world.