Skip to main content

UK: vehicle overloading convictions down but problem persists

Overloading of vehicles in the United Kingdom continues to be a serious issue, according to data from the government’s Driver and Vehicle Standards Agency (DVSA) and Vehicle and Operator Services Agency (VOSA). The report, Annual Effectiveness 2013/2014, documents data on driving offences for heavy and light goods vehicles, public service vehicles and trailers. The number of convictions for overloading heavy goods vehicles (HGVs) was 147, down from 231 in 2012/13 and 166 a year earlier. But overloading rema
March 9, 2015 Read time: 3 mins
Overloaded offences drop but problems persists
Overloading of vehicles in the United Kingdom continues to be a serious issue, according to data from the government’s Driver and Vehicle Standards Agency (DVSA) and Vehicle and Operator Services Agency (VOSA)

The report, Annual Effectiveness 2013/2014, documents data on driving offences for heavy and light goods vehicles, public service vehicles and trailers.

The number of convictions for overloading heavy goods vehicles (HGVs) was 147, down from 231 in 2012/13 and 166 a year earlier. But overloading remains the fifth top vehicle offence, behind the top offence by convictions, drivers’ hours, and the second place offence of tachograph misuse.

There is still no room for complacency, said Colin Smith, axle weighing expert at 6140 Avery Weigh-Tronix, based in the UK.

“As well as being a criminal offence which can attract fines and prosecution, overloading can have a detrimental impact on the roadworthiness of vehicles, from braking systems to increased instability and wear and tear," he said.

“It is also worrying to note that roadside checks found defects in braking systems of almost 19% of HGV trailers, along with various other issues such as steering, suspension and tyres. An overloaded vehicle in good condition is potentially hazardous, but overloading a vehicle which also has other issues relating to its roadworthiness could be extremely dangerous.”

The report also shows that overloading of Light Goods Vehicles (LGV) is still the top offence on UK roads, with both the number of prosecutions and the average fine up on last year. Last year there were 290 convictions, up from 256 the year before but down from 316 in 2011/12.

More than 13% of HGVs were taken off the road immediately following roadside checks and checks at an operator’s premises for brake, steering or tyre defects. Worryingly, another 35% of HGVs were handed a delayed prohibition, meaning the defect was not severe enough to warrant taking the HGV immediately off the road.

For LGVs, a third of those inspected were immediately taken off the road.

3963 Brake, steering and tyre defects can be caused by overloading. “I hope that these figures serve as a warning to fleet operators that overloading is a serious issue,” said Smith.

“Both the driver of the vehicle and the operator are legally responsible for avoiding overloading and both can be prosecuted. Drivers and operators should familiarise themselves with the legislation to ensure they know and understand their obligations.”

For more information on companies in this article

Related Content

  • Campaign urges UK drivers to get eye tested every 2 years
    August 5, 2013
    A new campaign is calling on UK drivers to ‘sharpen up’ their act by getting their eyesight tested every two years to ensure their vision meets legal standards and they aren't putting people in danger. The campaign by road safety charity Brake, in association with the DVLA, insurer RSA and Specsavers, comes as new research shows many drivers are failing to ensure they can see properly on every journey. A survey of 1,000 UK drivers by Brake, RSA and Specsavers finds that a quarter of drivers (26%) haven't ha
  • Accurate weigh-in-motion technology
    June 21, 2016
    Weigh-in-motion technology is ensuring increasingly accurate, and flexible, weighing stations. Weigh-in-motion specialist manufacturer Axtec says that its space-saving dynamic weighbridge is accurate to within ±0.5% and is the most precise system in the world. From its Runcorn, UK manufacturing facility, Axtec undertakes research and development of new technologies, as well as software testing, fabrication, construction and installation of WIM products. Axtec’s axle weighing platform design is intended f
  • Avery Weigh-Tronix acquires UK-based Central Weighing Ltd
    July 9, 2012
    AVERY Weigh-Tronix, one of the world’s biggest suppliers of weighing equipment and solutions, has completed the takeover of UK-based weighing specialists Central Weighing. Peggi Trimble, general manager, industrial division for Avery-Weigh-Tronix (AWT), said the acquisition would give AWT the opportunity to expand its “global reach” and “bring added-value, innovative products to the market by leveraging existing distribution networks”.
  • Avery Weigh-Tronix acquires UK-based Central Weighing Ltd
    August 14, 2012
    AVERY Weigh-Tronix, one of the world’s biggest suppliers of weighing equipment and solutions, has completed the takeover of UK-based weighing specialists Central Weighing. Peggi Trimble, general manager, industrial division for Avery-Weigh-Tronix (AWT), said the acquisition would give AWT the opportunity to expand its “global reach” and “bring added-value, innovative products to the market by leveraging existing distribution networks”.