SwiftGate for Pennsylvania Turnpike

The Tuscarora Mountain Tunnel consists of individual two-lane highway tunnels through the Tuscarora Mountain between Huntingdon and Franklin Counties in rural Pennsylvania. Each tunnel is around 1.6km long with portal buildings at each end. As part of a rehabilitation project, Versilis, based in Quebec, Canada, was selected by the Pennsylvania Turnpike Commission to supply a permanent automated lane closure system at each tunnel approach.
October 19, 2020 Read time: 2 mins
Two series of SwiftGate HSG-18CW automated gate systems facilitate the lane shifts during lane closure in the Tuscarora Mountain Tunnel

Tunnel closure using standard maintenance of traffic procedures can take up to 45 minutes or 90 minutes to open and close. This reduces the night-time work window. The solution was to install two series of SwiftGate HSG-18CW automated gate systems - 38 gates in all – to facilitate the lane shifts required as part of tunnel closures.

A taper of automated gates is deployed in less than five minutes. The gate system can be operated locally using the Versilis RF Handheld Remote Control or remotely using the Versilis web page. Full integration of the gates within the tunnel SCADA traffic management centre system is underway as part of another project. The Versilis SwiftGate HSG-18CW is crash-tested to NCHRP-350 requirements. Each gate has a very narrow mechanism footprint, allowing installation on a narrow median barrier wall.

Gate arms offer increased visibility in order to send a clear message to motorists that an access is closed. The Versilis communication hardware allows different operation and monitoring options as well as easy integration into a traffic management centre system using NTCIP protocol.

Highway & Network Management

For more information on companies in this article

Related Content

  • SICK launches 3D TIC502 LiDAR sensor system for traffic management
    May 18, 2018
    Sick says that its latest TIC502 twin LiDAR sensor system has high all-weather capability between -40OC and +60OC. The TIC502 incorporates vehicle speed detection with 3D profiling and counting of fast-lane, free flowing and static traffic to facilitate toll charge assessment. It can also be integrated with additional 2D LiDAR sensors to count axles for complete traffic profiling and assessment in a single system, according to the company that was set up in 1946 by optical engineer Erwin Sick in Waldkir
    Read More
  • ProTec-Tor 120 offers rapid access for emergency services
    June 28, 2017
    Mobile road restraint systems at roadworks, such as the narrow, high-containment ProTec family of crash barriers, prevent users from leaving the carriageway and heading into oncoming traffic and make it essentially safer to work on site. To keep vehicles moving at roadworks, it may be necessary to take the traffic through a lane onto the oncoming carriageway because the actual directional carriageway is being resurfaced. To separate the contraflow traffic, the individual crash barrier elements are connected
    Read More
  • Mobile Barriers develops crane-and-bucket for Mobile Barrier MBT-1
    November 7, 2017
    Mobile BarrierMobile Barriers has developed a crane with a hook-and-bucket setup for the company’s Mobile Barrier MBT-1. The crane-and-bucket combination is positioned on its own 3m removeable wall section and provides a 9.15m reach and a capacity of 3900kg at base and 680kg at 9.15m. The unit can be operated from the ground or bucket via wireless controls. The bucket can be rotated out of the way or removed when not in use. Physical Stop points ensure that the crane and bucket do not encroach on live lanes
    Read More
  • Advances in concrete paving technology will increase efficiency
    July 1, 2014
    New developments in concrete paving will increase working efficiency for contractors - Mike Woof writes The concrete paving market is a fiercely competitive segment of the off-highway construction machinery business. Although there are only a few key players in this niche market, the firms are constantly developing new systems, equipment and methods in a bid to help improve working efficiencies for contractors working in the sector. It is of note that the majority of the key players in the concrete pavin
    Read More

Highlighted Content