Nyx Hemera to launch its tunnel version of its TLACS system

Nyx Hemera Technologies will release TLACS-U, a version of the adaptive lighting control system TLACS, specifically for underpasses and short tunnels in North America and Europe. TLACS - tunnel lighting addressable control system – with LED and HPS lighting systems is installed in more than 75 tunnels worldwide, including in Singapore, Spain, Peru, the US and Canada with LED and HPS lighting systems. TLACS-U has been developed for underpass and small tunnels operators who want to get the most from the
January 9, 2019 Read time: 2 mins

7281 Nyx Hemera Technologies will release TLACS-U, a version of the adaptive lighting control system TLACS, specifically for underpasses and short tunnels in North America and Europe.

TLACS - tunnel lighting addressable control system – with LED and HPS lighting systems is installed in more than 75 tunnels worldwide, including in Singapore, Spain, Peru, the US and Canada with LED and HPS lighting systems.

TLACS-U has been developed for underpass and small tunnels operators who want to get the most from their LED luminaires with a seamless solution. The U system allows real-time dimming control and monitoring. City officials can interact directly with their infrastructure and monitor what is happening in their underpasses.

The TLACS-U version includes a UDE - underpass dimming enclosure - a preconfigured plug and play intelligent controller packaged in a rugged cabinet for short tunnel applications and underpasses.

The new TLACS version comes either in a power line version for communication over the underpass power distribution or lighting network or in a wired version. “This new solution is preconfigured as well as easy to operate and to commission by the operators,” explained Pierre Longtin, president of Nyx Hemera Technologies, which is based in Quebec City, Canada.

The luminance camera helps to reduce the black hole effect at the tunnel entrance. It sends a signal to the network controller (NWC), which adjusts the lumen level at the entrance and inside the tunnel.

The illuminescence camera reads the real lumen level inside the tunnel, which can vary due to dirt accumulation on the luminaire. The camera sends the signal to the NWC, which dynamically adjusts the lumen level inside the tunnel as per transport regulations.

Local product controllers (LPCs) are either installed in the luminaires or the cabinet depending on the TLACS version. Their function is to turn luminaires on using power line communication or dedicated wires.  

NWCs gather data from a multitude of LPCs from the same group. They also control the LPCs’ relay status according to their locations or from the signal from a photometer or luminance camera.

A user interface located either in the cabinet or at the command centre is connected to the NWC to configure, control, and monitor tunnel operations.

Highway & Network Management

For more information on companies in this article

Related Content

  • Latest loader innovations
    January 21, 2025
    A range of loader innovations is coming to the wheeled loader segment – Mike Woof writes
    Read More
  • Bilbao benefits from major tunnel project
    February 10, 2012
    The northern Spanish city of Bilbao looks set to benefit from a major tunnel construction project aimed at reducing traffic congestion on its vehicle clogged streets. The city is building a new underground metro section, Line 3, which will help carry commuters to and from the city's commercial centre and help reduce vehicle journey times on the surface. This project is also making use of the latest piece of tunnelling equipment from Sandvik, the MT520 roadheader, a powerful machine designed and built at
    Read More
  • LA gets Smartstud technology
    February 8, 2012
    In January, a US$3.2 million project saw the California Department of Transportation (Caltrans) in the USA start operating a dynamic lane in Los Angeles. The lane at the northbound Pasadena Freeway (SR-110) connector to the northbound Golden State Freeway (I-5) provides more capacity and provides congestion relief, and is the first of its kind to be introduced in the state. It operates as an optional connector lane during peak hours and a through-lane on SR-110 during general hours, and includes Smartstuds
    Read More
  • Integrated corridor management offers transportation efficiency
    May 28, 2013
    In the Intelligent Transportation Systems world, the concept of managing roadway or transportation corridors is not new. Smart Corridor concepts have existed for some time, such as the Santa Monica Smart Corridor system from the 1990s. Across the world, a new emerging model for operating roadway transportation networks called integrated corridor management (ICM) has emerged. This is particularly true in California, where several new ICM projects have or are being deployed. There is a new paradigm for corrid
    Read More

Highlighted Content