Nyx Hemera to launch its tunnel version of its TLACS system

Nyx Hemera Technologies will release TLACS-U, a version of the adaptive lighting control system TLACS, specifically for underpasses and short tunnels in North America and Europe. TLACS - tunnel lighting addressable control system – with LED and HPS lighting systems is installed in more than 75 tunnels worldwide, including in Singapore, Spain, Peru, the US and Canada with LED and HPS lighting systems. TLACS-U has been developed for underpass and small tunnels operators who want to get the most from the
January 9, 2019 Read time: 2 mins

7281 Nyx Hemera Technologies will release TLACS-U, a version of the adaptive lighting control system TLACS, specifically for underpasses and short tunnels in North America and Europe.

TLACS - tunnel lighting addressable control system – with LED and HPS lighting systems is installed in more than 75 tunnels worldwide, including in Singapore, Spain, Peru, the US and Canada with LED and HPS lighting systems.

TLACS-U has been developed for underpass and small tunnels operators who want to get the most from their LED luminaires with a seamless solution. The U system allows real-time dimming control and monitoring. City officials can interact directly with their infrastructure and monitor what is happening in their underpasses.

The TLACS-U version includes a UDE - underpass dimming enclosure - a preconfigured plug and play intelligent controller packaged in a rugged cabinet for short tunnel applications and underpasses.

The new TLACS version comes either in a power line version for communication over the underpass power distribution or lighting network or in a wired version. “This new solution is preconfigured as well as easy to operate and to commission by the operators,” explained Pierre Longtin, president of Nyx Hemera Technologies, which is based in Quebec City, Canada.

The luminance camera helps to reduce the black hole effect at the tunnel entrance. It sends a signal to the network controller (NWC), which adjusts the lumen level at the entrance and inside the tunnel.

The illuminescence camera reads the real lumen level inside the tunnel, which can vary due to dirt accumulation on the luminaire. The camera sends the signal to the NWC, which dynamically adjusts the lumen level inside the tunnel as per transport regulations.

Local product controllers (LPCs) are either installed in the luminaires or the cabinet depending on the TLACS version. Their function is to turn luminaires on using power line communication or dedicated wires.  

NWCs gather data from a multitude of LPCs from the same group. They also control the LPCs’ relay status according to their locations or from the signal from a photometer or luminance camera.

A user interface located either in the cabinet or at the command centre is connected to the NWC to configure, control, and monitor tunnel operations.

Highway & Network Management

For more information on companies in this article

Related Content

  • Our connected and automated future to go under the microscope at RA – IRF Sydney Conference
    May 10, 2018
    As industry and governments around the world continue to grapple with the challenges of vehicle automation, experts will gather in Sydney at the end of May to take stock of progress on the global journey to a new era of mobility. The two-day 2018 Roads Australia (RA) – IRF Regional Conference for Asia and Australasia, to be held over May 31st and June 1st, marks only the second time the two organisations have co-hosted an international event ‘down under’. And with RA playing a key role in helping inform t
    Read More
  • LiuGong invests hard to be seen as made, tested and supported in Europe
    January 26, 2018
    LiuGong is investing hard in Europe, determined to be seen as a global player whose products are “made in Europe, tested in Europe and supported in Europe.” Along with new European headquarters based in Warsaw, LiuGong is also opening up a new European production line and a new continent-wide parts distribution centre at its Dressta manufacturing centre in Stalowa Wola. Geoff Hadwick reports
    Read More
  • Automated testing is safer, cheaper and more thorough
    December 12, 2018
    Automated testing is improving safety during paving and saving on testing costs. But it could also help reduce long-term maintenance costs too - Kristina Smith writes Testing pavements as they are laid can be a hazardous activity. The technician may be on their hands and knees, far behind the main gang, or reaching inside the hopper to measure the temperature of the hot mix or dodging rollers to take density readings.
    Read More
  • Trimble advances in machine control
    July 11, 2018
    Trimble is offering new advances in machine control technology – Mike Woof writes An important technology advance from Trimble is now coming from its expanding range of EarthWorks machine control systems. These systems can help deliver more efficient earthmoving operations, increasing productivity while maintaining accuracy. The first EarthWorks system was developed for use with excavators and this latest system is designed to be used with dozers, utilising much of the same hardware. Meanwhile, other Ea
    Read More

Highlighted Content