New camera system offers accurate detection capabilities

Image Sensing Solutions is now offering its sophisticated range of 5.1 MP, 154fps Camera Link V2.0 modules. These units feature the firm’s advanced global-shutter CMOS technology. The XCL-SG510 camera series is suited to duties in a wide range of sectors and can be used to capture high-speed moving objects in low (0.5 lx), imperfect or changing lighting conditions. The black/white and colour modules make use of the large bandwidth available through Camera Link to provide both high frame rates and on-camera
June 15, 2018 Read time: 2 mins
8813 Image Sensing Solutions is now offering its sophisticated range of 5.1 MP, 154fps Camera Link V2.0 modules. These units feature the firm’s advanced global-shutter CMOS technology. The XCL-SG510 camera series is suited to duties in a wide range of sectors and can be used to capture high-speed moving objects in low (0.5 lx), imperfect or changing lighting conditions.


The black/white and colour modules make use of the large bandwidth available through Camera Link to provide both high frame rates and on-camera functions including wide dynamic range, frame accumulation, shading and error correction, single and multi ROI (region of interest) imaging and area gain/exposure.

These functions can be hardware and software triggered, using edge detection, pulse width detection, bulk trigger and sequential trigger modes. The XCL-SG510 module uses the Sony 2/3-type Exmor CMOS sensor with Pregius technology. According to the firm, this module is able to extract high-quality images.

The XCL-SG510 joins the XCL-CG510 5.1 MP GigE camera in the firm’s growing range of GS CMOS technologies. The b/w module has a minimum illumination of just 0.5 lx, the colour module requires just 12 lx and comes with a one-push white balance. Both have a sensitivity of F5.6, a gain of 0 to +18 dB, a shutter speed of 60s to 1/100,000s.

The C-mount modules measure 44 x 44 x 30 mm, weigh 96grammes, have an operating temperature and humidity range of -5°C to +45°C and 20% to 80%, and have high shock/vibration resistance - to 70G.

Highway & Network Management

For more information on companies in this article

Related Content

  • New milling machine advances
    June 15, 2020
    Two of the leaders in the milling machine market are now offering upgraded planers
    Read More
  • Machine control technology evolving fast
    February 8, 2012
    The machine control market is evolving fast and is increasingly becoming part of a much wider construction site management concept, Mike Woof reports. Machine control technology has come a long way in the past 20 years and the development of 2D and 3D systems has been rapid in the construction sector.
    Read More
  • Speed cameras in Belgium ineffective in the dark
    May 14, 2012
    According to a Belgian police report, speed cameras cannot read licence plates correctly in the dark unless they are near to street lights. The report follows tests carried out between 10 and 21 January 2010 on the two most commonly used speed cameras in Belgium. The report also found that speed cameras are able to read yellow licence plates with black lettering more easily than other types of plates, such as the white plate with white background and red letters chosen by Belgium.
    Read More
  • Developments in concrete pavers boosts quality
    July 13, 2012
    The latest technology continues to improve the quality of concrete paving while contractors are also benefiting from more adaptable equipment - Mike Woof reports For many concrete paving applications, versatility is required rather than a high production rate. Leading paver manufacturers such as GOMACO, Power Curbers, Terex and Wirtgen all offer high mobility machines that can be adjusted to cope with an array of tasks. For a contractor, the advantage of these smaller pavers is that they can be configured q
    Read More

Highlighted Content