New camera system offers accurate detection capabilities

Image Sensing Solutions is now offering its sophisticated range of 5.1 MP, 154fps Camera Link V2.0 modules. These units feature the firm’s advanced global-shutter CMOS technology. The XCL-SG510 camera series is suited to duties in a wide range of sectors and can be used to capture high-speed moving objects in low (0.5 lx), imperfect or changing lighting conditions. The black/white and colour modules make use of the large bandwidth available through Camera Link to provide both high frame rates and on-camera
June 15, 2018 Read time: 2 mins
8813 Image Sensing Solutions is now offering its sophisticated range of 5.1 MP, 154fps Camera Link V2.0 modules. These units feature the firm’s advanced global-shutter CMOS technology. The XCL-SG510 camera series is suited to duties in a wide range of sectors and can be used to capture high-speed moving objects in low (0.5 lx), imperfect or changing lighting conditions.


The black/white and colour modules make use of the large bandwidth available through Camera Link to provide both high frame rates and on-camera functions including wide dynamic range, frame accumulation, shading and error correction, single and multi ROI (region of interest) imaging and area gain/exposure.

These functions can be hardware and software triggered, using edge detection, pulse width detection, bulk trigger and sequential trigger modes. The XCL-SG510 module uses the Sony 2/3-type Exmor CMOS sensor with Pregius technology. According to the firm, this module is able to extract high-quality images.

The XCL-SG510 joins the XCL-CG510 5.1 MP GigE camera in the firm’s growing range of GS CMOS technologies. The b/w module has a minimum illumination of just 0.5 lx, the colour module requires just 12 lx and comes with a one-push white balance. Both have a sensitivity of F5.6, a gain of 0 to +18 dB, a shutter speed of 60s to 1/100,000s.

The C-mount modules measure 44 x 44 x 30 mm, weigh 96grammes, have an operating temperature and humidity range of -5°C to +45°C and 20% to 80%, and have high shock/vibration resistance - to 70G.

Highway & Network Management

For more information on companies in this article

Related Content

  • Texo flying high in the UK with a Topcon Falcon 8+ UAV
    July 3, 2018
    Texo Drone Survey and Inspection says that it is the first company in the UK to fly the Falcon 8+ UAV system from Topcon. The multicamera payload Topcon Falcon 8+ is the third-generation edition of the Falcon Drone system that was introduced in 2009 for aerial imaging, monitoring and mapping. The Topcon Falcon 8+ needs minimal pilot corrections while its GCS includes built-in automated flight functions. There is also advanced flight planning thanks to the Intel Cockpit Controller.
    Read More
  • New US pavers coming to market
    June 21, 2016
    Key developments are being seen in the market for US pavers, with new models being introduced by several key manufacturers - Mike Woof writes An array of new US-style paver models is now being made available on the market. Several of the main manufacturers have developed updated paver models, with new low emission engines being amongst the key upgrades being fitted. Atlas Copco has new Dynapac pavers available in the shape of its F800T tracked machine as well as the F1000T tracked and F1000W wheeled
    Read More
  • UK gets its first wrong-way slip detection installation
    February 13, 2020
    Drivers mistakenly travelling in the wrong direction towards traffic exiting motorways and dual carriageways will be alerted using a pioneering warning system in Scotland.
    Read More
  • New soil compactor launches from key manufacturers
    May 30, 2013
    Major manufacturers continue to develop new soil compactor models - Mike Woof reports. Innovations in machine design are being seen in the soil compaction sector from a number of major firms. As in other equipment sectors, new engine emissions legislation has played a huge role in driving the latest design changes. Europe, the US and Japan are rolling in the new Tier 4 Final/Stage IV legislation on noise and exhaust emissions which will be phased in across power output classes from the start of January 2014
    Read More

Highlighted Content