On the level with Intercomp’s LS630-WIM weigh-in-motion system

The system increases facility efficiency by accurately weighing vehicles travelling up to 15km/h. Coupled with the 4.14m-wide weighbridge, nearly any vehicle, including those with a wide load or trailer, can be quickly screened. Intercomp says its weigh-in-motion LS630-WIM system is ideal for high traffic volumes at temporary facilities to monitor axle weight or GVW (gross vehicle weight) compliance. Additionally, the portable system can be used at multiple locations as two people can deploy or stow the s
June 10, 2019 Read time: 2 mins
The system increases facility efficiency by accurately weighing vehicles travelling up to 15km/h. Coupled with the 4.14m-wide weighbridge, nearly any vehicle, including those with a wide load or trailer, can be quickly screened.


1315 Intercomp says its weigh-in-motion LS630-WIM system is ideal for high traffic volumes at temporary facilities to monitor axle weight or GVW (gross vehicle weight) compliance.

Additionally, the portable system can be used at multiple locations as two people can deploy or stow the scale pads, ramps/levellers and output CPU in less than 15 minutes. This makes the dynamic weighing system ideal for avoiding undesirable traffic backups due to weight verification operations.

Two scale pads, four roll-up ramps/levelers and dedicated PT20 WIM CPU, or PC, can fit in the trunk of most full-sized vehicles.

The ramps/levellers keep adjacent axles on plane for optimal results. The system accumulates up to 36 individual axles for gross vehicle weight. It also switches to static mode easily.

Highway & Network Management

For more information on companies in this article

Related Content

  • Kistler WiM for Caltrans
    February 10, 2023
    Caltrans, the transportation agency of the US state of California, needs to effectively plan maintenance, design roads and keep bridges in good condition. But existing measuring technology was limited to solely counting and classifying vehicles according to their type, for instance, passenger cars, buses or trucks.
    Read More
  • Hyundai’s HL940 and 955 Tool Master versions set for work
    March 11, 2016
    Tool Master versions of Hyundai’s new wheel loaders, the HL940 TM and HL955 TM, have parallel kinematics, instead of a conventional Z-bar. The HL940 TM and HL955 TM are fitted with a quick coupler to be used with a multitude of attachments, such as forks and grapples. They two machines share many new features with their quarrying counterparts, the HL970 and HL980. Silent, safe and comfortable is the 10% larger ROPS/FOG/FOPS new cabin whose soundproofing ensures maximum silence (68 dB). The new models
    Read More
  • Hyundai’s HL940 and 955 Tool Master versions set for work
    January 6, 2017
    Tool Master versions of Hyundai’s new wheel loaders, the HL940 TM and HL955 TM, have parallel kinematics, instead of a conventional Z-bar. The HL940 TM and HL955 TM are fitted with a quick coupler to be used with a multitude of attachments, such as forks and grapples. They two machines share many new features with their quarrying counterparts, the HL970 and HL980. Silent, safe and comfortable is the 10% larger ROPS/FOG/FOPS new cabin whose soundproofing ensures maximum silence (68 dB). The new models
    Read More
  • IRD wins nation-wide FHWA contract
    March 1, 2012
    International Road Dynamics (IRD) has been awarded a contract for "weigh-in-motion (WIM) systems maintenance and data services" by the US Department of Transportation, Federal Highway Administration (FHWA).
    Read More

Highlighted Content