On the level with Intercomp’s LS630-WIM weigh-in-motion system

The system increases facility efficiency by accurately weighing vehicles travelling up to 15km/h. Coupled with the 4.14m-wide weighbridge, nearly any vehicle, including those with a wide load or trailer, can be quickly screened. Intercomp says its weigh-in-motion LS630-WIM system is ideal for high traffic volumes at temporary facilities to monitor axle weight or GVW (gross vehicle weight) compliance. Additionally, the portable system can be used at multiple locations as two people can deploy or stow the s
June 10, 2019 Read time: 2 mins
The system increases facility efficiency by accurately weighing vehicles travelling up to 15km/h. Coupled with the 4.14m-wide weighbridge, nearly any vehicle, including those with a wide load or trailer, can be quickly screened.


1315 Intercomp says its weigh-in-motion LS630-WIM system is ideal for high traffic volumes at temporary facilities to monitor axle weight or GVW (gross vehicle weight) compliance.

Additionally, the portable system can be used at multiple locations as two people can deploy or stow the scale pads, ramps/levellers and output CPU in less than 15 minutes. This makes the dynamic weighing system ideal for avoiding undesirable traffic backups due to weight verification operations.

Two scale pads, four roll-up ramps/levelers and dedicated PT20 WIM CPU, or PC, can fit in the trunk of most full-sized vehicles.

The ramps/levellers keep adjacent axles on plane for optimal results. The system accumulates up to 36 individual axles for gross vehicle weight. It also switches to static mode easily.

Highway & Network Management

For more information on companies in this article

Related Content

  • Dynapac is now offering a powerful new tamping compactor
    February 17, 2014
    Atlas Copco Construction Equipment’s Dynapac division is introducing the CT3000 tamping compactor. Accorrding to the firm this uit offers rapid and efficient compaction for delivering specified densities on cohesive and semi-cohesive soils. With an operating weight of 22.5tonnes and an average production capacity of 820.7m3/hour, the Dynapac CT3000 is said to suit duties on projects such as highways, dams and airport runways where large-volume earthwork is required. Power comes from a Cummins diesel delive
    Read More
  • Doosan’s DX140LCR-5 crawler excavator has reduced tail swing
    March 16, 2016
    Doosan’s new DX140LCR-5 15tonne reduced tail swing crawler excavator is powered by the Perkins 1204F engine, which combines reduced fuel consumption with the power and torque of larger engines with a smaller displacement. The new Perkins 1204F engine provides a 6% increase in power with an output of 85.9kW at 2,000 rpm and a 3% increase in torque. Swing torque has also been boosted by 28%. Trouble-free operation is guaranteed by meeting Stage IV emission regulations without the need for a diesel parti
    Read More
  • Holcim UK rolls out Fuelre4m low carbon refuelling tech
    June 3, 2025
    Re4mx technology helped achieve a 15 to 20% drop in fuel use during trials
    Read More
  • Innovations in concrete paving technology
    March 16, 2012
    Paving with concrete offers a strong and long life base for a roadway, with manufacturers continuing to develop technologies – Mike Woof reports. Innovation comes fast in the concrete paving market with a number of specialist suppliers offering an array of solutions to meet the needs of slipforming contractors. These machines can be used for a range of applications from large-scale airport runway or highway construction duties, tunnel jobs, bridge decks, barriers, traffic islands and kerbs. Because the app
    Read More

Highlighted Content