Skip to main content

On the level with Intercomp’s LS630-WIM weigh-in-motion system

The system increases facility efficiency by accurately weighing vehicles travelling up to 15km/h. Coupled with the 4.14m-wide weighbridge, nearly any vehicle, including those with a wide load or trailer, can be quickly screened. Intercomp says its weigh-in-motion LS630-WIM system is ideal for high traffic volumes at temporary facilities to monitor axle weight or GVW (gross vehicle weight) compliance. Additionally, the portable system can be used at multiple locations as two people can deploy or stow the s
June 10, 2019 Read time: 2 mins
The system increases facility efficiency by accurately weighing vehicles travelling up to 15km/h. Coupled with the 4.14m-wide weighbridge, nearly any vehicle, including those with a wide load or trailer, can be quickly screened.


1315 Intercomp says its weigh-in-motion LS630-WIM system is ideal for high traffic volumes at temporary facilities to monitor axle weight or GVW (gross vehicle weight) compliance.

Additionally, the portable system can be used at multiple locations as two people can deploy or stow the scale pads, ramps/levellers and output CPU in less than 15 minutes. This makes the dynamic weighing system ideal for avoiding undesirable traffic backups due to weight verification operations.

Two scale pads, four roll-up ramps/levelers and dedicated PT20 WIM CPU, or PC, can fit in the trunk of most full-sized vehicles.

The ramps/levellers keep adjacent axles on plane for optimal results. The system accumulates up to 36 individual axles for gross vehicle weight. It also switches to static mode easily.

For more information on companies in this article

Related Content

  • Growing WIM demand in Russia and South America
    April 4, 2014
    One Eastern European WIM manufacturer is finding commercial success in Russia, while another leading manufacturer is in demand in South America, as Guy Woodford reports Since Czech WIM technology manufacturer Camea secured type approval for its UnicamWIM system in early 2013, the firm has been installing a number of the systems in different Russian regions. These have included two UnicamWIM stations in Novosibirsk, one in the Kostroma region, and another on the M20 Highway between Belarus and Russia.
  • Accurate weigh-in-motion technology
    June 21, 2016
    Weigh-in-motion technology is ensuring increasingly accurate, and flexible, weighing stations. Weigh-in-motion specialist manufacturer Axtec says that its space-saving dynamic weighbridge is accurate to within ±0.5% and is the most precise system in the world. From its Runcorn, UK manufacturing facility, Axtec undertakes research and development of new technologies, as well as software testing, fabrication, construction and installation of WIM products. Axtec’s axle weighing platform design is intended f
  • Weigh in motion systems aid overweight vehicle detection
    July 12, 2012
    Modern weighing equipment helps road operators tackle the costly business of road damage caused by overloaded trucks as Patrick Smith reports. Overloading of commercial vehicles has a major impact on the life expectancy of road networks. The cost of premature road failure and repairs is a major burden on many governments particularly in developing countries where this problem diverts vital funding that could otherwise be spent on health and education.
  • New Weigh in Motion solutions unveiled to customers at Intertraffic 2014 Amsterdam
    October 1, 2014
    Exciting weigh in motion solutions have been introduced, while a leading North American WIM firm has secured a lucrative US contract. Guy Woodford reports Globally renowned Swiss WIM solution manufacturer Kistler recently launched its new Lineas WIM Data Logger. The data logger has been developed specifically to interface Lineas WIM sensors and to provide the most accurate vehicle weight data. It can be easily integrated into any overall solution by a system integrator to optimally cover several applica