Jenoptik’s Vector SR gets UK HOTA approval

Vector SR, a new Spot Speed camera from Jenoptik, has achieved Home Office Type Approval – HOTA - a UK certification.
October 1, 2019 Read time: 2 mins
Spot the speeders: Jenoptik’s Vector SR is a practical solution

Achieving HOTA means the system passed rigorous evaluation and testing required to allow it to be operated as an unattended enforcement device for the measurement of vehicle speeds.


3987 Jenoptik are best known in the UK for the Specs average speed enforcement cameras that are used at more than 150 sites. The Vector SR solution was developed as a complementary enforcement device for the measurement of spot speeds. Where vehicle speeds need to be managed over a short section of road, Vector SR provides a practical and cost-effective solution, says the manufacturer. This allows those responsible for road safety to address collision hotspots while also providing a practical alternative for obsolete wet-film camera sites.

Vector SR uses the highly capable Vector2 integrated ANPR (automatic number plate recognition) camera platform, working alongside Jenoptik’s own 3D tracking radar device. Both modules are lightweight and low power, allowing Vector SR to be mounted on a passively safe pole – something that has not been possible before with older enforcement technologies, said the company.

The system can operate alongside the patented Vector IR Infra-Red illumination module, allowing image capture on a fully dark road without any distracting flashes or dazzling puddles of light.

Vector SR is supported by Infra-Red illumination, is lightweight enough to mount on a passively safe pole or existing street furniture and has no need for in-road sensors, explained Geoff Collins, Jenoptik’s marketing director.

Jenoptik’s expertise extends to measuring average speed over a defined section of road – called section speed control - and automated number plate recognition. Thanks to the digital combination of several sensor technologies with software and data management, Jenoptik is also a new systems supplier for truck toll monitoring on federal highways in Germany.

 

Highway & Network Management

For more information on companies in this article

Related Content

  • Efficient truck loading to optimise operations
    September 14, 2017
    Specialist supplier LASE commissioned the LaseTVM tool on a road construction site for contractor EuroTransStroy at a construction site in St Petersburg, Russia. The laser-based measurement system is able to determine the volume of bulk materials such as sand and crushed stones with high accuracy. This can be used to prevent differences in loads from one truck to another, so as to ensure consistency. The system also identifies truck license plates and the load area, providing comprehensive data collation.
    Read More
  • Efficient truck loading to optimise operations
    September 14, 2017
    Specialist supplier LASE commissioned the LaseTVM tool on a road construction site for contractor EuroTransStroy at a construction site in St Petersburg, Russia. The laser-based measurement system is able to determine the volume of bulk materials such as sand and crushed stones with high accuracy. This can be used to prevent differences in loads from one truck to another, so as to ensure consistency. The system also identifies truck license plates and the load area, providing comprehensive data collation.
    Read More
  • Efficient truck loading to optimise operations
    December 15, 2017
    Accurate technology has been utilised to measure the loads carried by dump trucks on a project in Russia. Specialist supplier LASE commissioned the LaseTVM tool on a road construction site for contractor EuroTransStroy at a construction site in St Petersburg, Russia. The laser-based measurement system is able to determine the volume of bulk materials such as sand and crushed stones with high accuracy. This can be used to prevent differences in loads from one truck to another, so as to ensure consistency.
    Read More
  • Accurate weigh-in-motion technology
    June 21, 2016
    Weigh-in-motion technology is ensuring increasingly accurate, and flexible, weighing stations. Weigh-in-motion specialist manufacturer Axtec says that its space-saving dynamic weighbridge is accurate to within ±0.5% and is the most precise system in the world. From its Runcorn, UK manufacturing facility, Axtec undertakes research and development of new technologies, as well as software testing, fabrication, construction and installation of WIM products. Axtec’s axle weighing platform design is intended f
    Read More

Highlighted Content