'Innovative' speed enforcement solution

An innovative next-generation solution from VITRONIC enables police forces to provide fixed and mobile speed enforcement from a single solution. The 'dual-use' housing system consists of LIDAR (laser-based) technology which captures speeding vehicles on up to three lanes in a single direction. The first of VITRONIC's pioneering system solutions has been sold to the Lithuanian Roads Administration. Consisting of a standard mobile PoliScanspeed enforcement system and a protective housing, both mobile and stat
July 24, 2012 Read time: 2 mins
An innovative next-generation solution from 2879 Vitronic enables police forces to provide fixed and mobile speed enforcement from a single solution. The 'dual-use' housing system consists of LIDAR (laser-based) technology which captures speeding vehicles on up to three lanes in a single direction.

The first of VITRONIC's pioneering system solutions has been sold to the Lithuanian Roads Administration. Consisting of a standard mobile PoliScanspeed enforcement system and a protective housing, both mobile and stationary speed checks can be carried out. The solution for a state-of-the-art system operates in temperatures between -30°C to +45°C.

The mobile components are mounted in the protective stationary housing. When mobile operation is required they can then be easily removed, transferred to a tripod/vehicle and then reinstalled after mobile surveillance is completed.

The core 3098 Laser Technology provides a multi-lane, multi-vehicle capacity with lane-specific speed detection. This software provides Automated Licence Plate Recognition (ALPR) and creates documents which are valid in a court of law.

Highway & Network Management

For more information on companies in this article

Related Content

  • Airport runway rebuild at Bologna
    May 15, 2019
    Rebuilding a runway requires special attention to detail to maximise efficiency and safety Airport runways face special challenges with regard to the loads they carry on a daily basis, particularly when aircraft are landing. A modern jet aircraft will typically land at speeds of around 240-260km/h, with a laden 747 weighing as much as 265tonnes at the end of a long flight. The stresses these large aircraft place on runway surfaces are enormous and not just with the massive impact forces exerted during
    Read More
  • Workzone safety protects workforce and drivers
    May 3, 2012
    Highway construction work zones are dangerous places, and anything that can improve safety is welcomed as Patrick Smith reports. The safe and efficient flow of traffic through work zones is a major concern to transportation officials, industry, the public, businesses, and commercial motor carriers. This is the view of the US Federal Highway Administration (FHWA), which has developed the Highway Work Zone Safety Program to reduce the fatalities and injurious crashes in work zones, and to enhance traffic oper
    Read More
  • Weigh in motion systems aid overweight vehicle detection
    July 12, 2012
    Modern weighing equipment helps road operators tackle the costly business of road damage caused by overloaded trucks as Patrick Smith reports. Overloading of commercial vehicles has a major impact on the life expectancy of road networks. The cost of premature road failure and repairs is a major burden on many governments particularly in developing countries where this problem diverts vital funding that could otherwise be spent on health and education.
    Read More
  • Technology helps earth moving and paving
    August 18, 2014
    Located in Meeker, Colorado and serving the area for air transportation is Meeker Airport, a C-II general aviation airport. The FAA designation of C-II means the airport can accommodate aircraft with wingspan of less than 24m. Runway 3-21 at the Rio Blanco county-owned Meeker Airport had reached a point of wear and deterioration that required full reconstruction and upgrades to remain compliant with the FAA’s C-II requirements.
    Read More

Highlighted Content