Skip to main content

DEELLC shines a light on solar site security

DEELLC’s Heavy Utility Gate, or HUG, is self-contained and solar powered making it suitable for harsh environments. The Hug, which features a 3m reflective arm, has several options to allow access, including radio control key fobs, visor remotes, keyed switch, and a stainless key pad with adjustable gate timing. The key pad offers from 1 to 999-second gate delay and also millions of codes. There is also a long-range intercom with a remote control gate opener operated from the office. The all-steel American-
March 10, 2015 Read time: 2 mins
DEELLC’s Heavy Utility Gate, or HUG, is self-contained and solar powered making it suitable for harsh environments.

The Hug, which features a 3m reflective arm, has several options to allow access, including radio control key fobs, visor remotes, keyed switch, and a stainless key pad with adjustable gate timing. The key pad offers from 1 to 999-second gate delay and also millions of codes.

There is also a long-range intercom with a remote control gate opener operated from the office. The all-steel American-made HUG also has an automatic exit sensor that picks up vehicular movement, eliminating false openings. 8029 DEELLC’s HUG has been embraced by the construction, energy, mining and military sectors. The American-made HUG uses a 2.5cm (1") solid steel axle shaft on two 1,400kg (3,100lb) rated cast iron roller bearings and an ultra-heavy duty stainless actuator that has a 1,406kg (3,400lb) load capacity - all for a 2.7kg (6lb) arm.

For more information on companies in this article

Related Content

  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    January 6, 2017
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which
  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    March 27, 2013
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which
  • Atlas Copco’s WEDA 04S pump
    January 30, 2014
    The WEDA 04S is the latest addition to the Atlas Copco Portable Energy line-up of small submersible pumps for the light construction and general equipment rental industries. A 0.4kW on-site sludge/trash pump with a maximum flow of 270lpm and a maximum head of 10.5m, the WEDA 04S complements the WEDA line of under 1kW single-phase drainage, sludge and residual pumps released last year. The new pump model has a cast iron vortex impeller that is able to pump dirty water and handle solids up to 2.5cm in size.
  • Pilosio and CMC Ravenna collaborate on Cornubia Interchange
    June 4, 2019
    The South African branch of the Italian construction company CMC di Ravenna again teamed up with formwork specialist Pilosio to take advantage of Pilosio's solutions. This time it was for construction of a new bridge in the city of Durban, a project named N2/Cornubia Interchange. The overpass will streamline traffic by linking the Umhlanga industrial zone with the Cornubia new development area Tongat. Cornubia is a multibillion rand integrated settlement near Umhlanga, north of Durban, in KwaZulu Natal,