Tackling congestion on Arkansas link

Engineering firm Michael Baker International has helped deliver highway improvements for a key link in Arkansas. The upgrade to Highway 70 involves widening and is designed to boost capacity along a 30km stretch of the route.
June 14, 2017 Read time: 1 min

Engineering firm Michael Baker International has helped deliver highway improvements for a key link in Arkansas. The upgrade to Highway 70 involves widening and is designed to boost capacity along a 30km stretch of the route. Michael Baker International completed a US$4.5 million design project for the Arkansas State Highway and Transportation Department (AHTD) is for widening of the section of Highway 70 from two lanes to four.

The firm carried out an environmental study and provided roadway widening design. This included replacement of the existing Caney Creek Bridge and two bridges over Ten Mile Creek. The firm came up with a design to widen and corrected deficiencies in road curve radii and super-elevation, flattening subgrade slopes on the low side of super-elevated sections to minimise ditch depths and right-of-way takes. The firm also designed a solution to add a long sweeping curve at the existing intersection with the I-30 Frontage Road to allow trucks to safely use the intersection for turns.

Highway & Network Management

Related Content

  • Rapid replacement of multiple bridges – the plan
    December 14, 2017
    The US State of Pennsylvania is saving itself $220 million over 10 years on a programme to replace 558 bridges with an unusual public private partnership approach - Kristina Smith writes It is called the Rapid Bridge Replacement Programme with good reason. Pennsylvania’s Department of Transport, PennDOT, wants to see no less than 558 structurally deficient bridges replaced with newly designed and constructed ones, all within four years. Using traditional forms of procurement this programme would be like
    Read More
  • Asphalt milling and paving with 3D control
    February 16, 2012
    Milling and paving repair operations for airport runways require particularly high tolerances, an obvious market for 3D control solutions writes Mike Woof. Airport runways require some of the most accurate quality standards and tightest tolerances of any asphalt or concrete surface. This is one area where the high precision capabilities of 3D systems offer clear advantages.
    Read More
  • Mexico’s new Jala-Puerto Vallarta Highway
    August 29, 2017
    Mexico’s highway infrastructure plays a key role in the country’s economy, carrying around 55% of its freight and 98% of its passenger traffic. To meet this demand, the network has 377,660km of roads in all. This is split between the 49,652km federal highway network, the 83,982km of state roads, 169.429km of rural roads and 74,596km of access roads. mHowever, although the federal road network manages to connect a large part of the country's strategic points, some stretches already present problems with satu
    Read More
  • New road links will cut congestion in St Petersburg
    June 20, 2016
    Road building will solve the problem of traffic jams in St Petersburg – Eugene Gerden writes The authorities in Russian city St Petersburg plan to solve the problem of traffic jams in the city during the next few years. The strategy is expected to be achieved through road building and the improvement of transport connections between different districts in the city. Implementation of these plans will take place as part of the decree 355 "Of the Strategy of St Petersburg Economic and Social Development
    Read More

Highlighted Content