Skip to main content

Stronger crash barriers may be needed for heavier trucks

The European Road Federation (ERF) has voiced its concern that roadside barriers in Europe may have to be upgraded. Meanwhile the UK’s Institute of Advanced Motorists (IAM) has called for roadside barriers to feature post protection so as to reduce the risk of injuries to motorcyclists. According to the ERF, the recent decision of the European Commission to allow cross-border movement of longer and heavier trucks, it is keen to raise awareness of the important implications such a move may have for road barr
November 26, 2012 Read time: 2 mins

The 1202 European Road Federation (ERF) has voiced its concern that roadside barriers in Europe may have to be upgraded. Meanwhile the UK’s 5125 Institute of Advanced Motorists (IAM) has called for roadside barriers to feature post protection so as to reduce the risk of injuries to motorcyclists. According to the ERF, the recent decision of the 2465 European Commission to allow cross-border movement of longer and heavier trucks, it is keen to raise awareness of the important implications such a move may have for road barriers.


‘Road safety barriers are designed and tested according to the maximum weight of vehicles circulating on Europe’s roads. The current European Norm (EN 1317) allows for the testing of barriers considering the impact of vehicles up to a maximum of 38tonnes. We are concerned that, should heavier vehicles be allowed to circulate more widely on Europe’s roads, this may have serious implications on the ability of road barriers to protect drivers from their own human mistakes’ explains Christophe Nicodème, Director General of the ERF.


'We do not have an ideological opposition to heavier vehicles', explained Konstandinos Diamandouros, Head of Office of Office at ERF and responsible for the area of road restraint systems. ‘We simply believe that the introduction of heavier vehicles on selected routes should be accompanied by the necessary adaptations to the road infrastructure and this of course includes safety barriers.’


The IAM has repeated its calls for improvements to guardrail used along most British roads. It points out that these are designed to protect motorists inside trucks, cars or buses. For motorcyclists the barriers themselves pose a safety hazard, as a fallen rider can impact with the support posts causing serious injury or death. Technology does exist to deal with the issue such as fitting additional barrier sections or impact cushions, but these are not widely used across Europe and are only required as yet in Spain.

For more information on companies in this article

Related Content

  • Need for defined work zone safety regulations
    April 12, 2012
    Christophe Nicodème, ERF's Director General, explores a missing link in the road safety chain Road works are an essential part of the work of public administrations and toll operators; aimed at preserving a safe road infrastructure for users, while minimising the disruption caused as a result of unavoidable traffic interventions. Given the essential role of road works, one would assume that well-defined regulations exist at national and European level to determine the best way of conducting them. Yet
  • A further crash test has been performed on SMA’s End Terminal
    July 5, 2016
    The latest crash test for the end terminal T4, made by SMA – Safety Modular Absorber - has been carried out to the EN 1317-7 standard. It was done in addition to the complete set of crash tests performed according to part 7 of the EN 1317. The test TT 6.3.110 had already been executed on the critical impact point selected by the CSI TestLab. SMA Road Safety said it shows “the excellence of the SMA end terminal to absorb the impacts coming from the opposite traffic direction”. The critical impact point is at
  • Innovative deformable speed bump
    June 28, 2013
    Spanish firm badennova is now offering a novel alternative to conventional speed bumps.
  • ERF gains membership in the CCAM Single Platform
    December 12, 2019
    The ERF has been appointed as a member of the CCAM Single Platform (Cooperative, Connected, Automated and Autonomous Mobility), explains Christophe Nicodème* of the ERF