Skip to main content

Safety trials for FORUM8 cycle simulator

Research by Morgan State University in the US using linked up driving and cycling simulators could help with safer urban road designs for both drivers and cyclists.
By David Arminas August 17, 2020 Read time: 4 mins
The wide road ahead: Morgan State University is using FORUM8 simulators (photo courtesy FORUM8)

Morgan State University in the US has installed a FORUM8 cycling simulator at its Safety and Behavioral Analysis Center to research vehicle and cyclist behaviours.

The simulator is from Japanese 3D simulation software manufacturer FORUM8. It will help investigate and collect data on interactions between drivers and cyclists under varied road and traffic conditions, said the Safety and Behavioral Analysis Center (SABA), located in Baltimore, northeastern US .

In 2018, 857 cyclists were killed in the US as a result of a road traffic accident, according to the latest data from the US National Highway Traffic Safety Administration. NHTSA is a Washington-based federal government agency that regulates road safety standards in general and motor vehicle safety standards in particular to “save lives, prevent injuries, reduce vehicle-related crashes”, according to its website.

The SABA research project aims to find out what can be done to help prevent bicycle injuries and deaths, many of which can be avoided if motorists and cyclists follow the rules of the road and watch out for each other, notes the university, specifically doctoral research institution.

The team, within the university’s Dept of Transportation and Urban Infrastructure Studies, has been conducting research into a range of specific driver behaviours. These include texting while driving, reactions to variable message signs and driving when using GPS in variable traffic and weather conditions.

The new research using the FORUM8 cycle simulator will simulate a road network. Data captured during the trials, such as speed, steering-control and braking, will be available in a detailed report at the end of the project to help. The goal is to improve road safety training for drivers and bikers as well for highway engineers responsible for improving road layouts and signage.

The bicycle simulator, installed in the SABA laboratory, is linked to the university’s two FORUM8 full-scale, high fidelity driving simulators and an eye-tracking system. The driving simulators comprise a cockpit designed to replicate a real production driving seat. It features all the usual controls necessary for the operation of a vehicle - steering wheel, hand brake, throttle, signal-light controllers, emergency blinkers, brake pedals and an automatic gear shift lever.

The cockpit is surrounded by three monitors that project front and peripheral views of the 3D simulated road network and wider cityscape generated by FORUM8’s interactive software called VR Design Studio, but also known as UC-win/Road software.

The bicycle simulator comprises a standard, fixed road bike with a single monitor that displays the same simulated road network as projected onto the drive simulator screens. It provides the rider with a view of a realistic 3D environment including roads, bridges, signage, buildings, pedestrians, and landscape details.

Networked together the simulators are centrally managed from the researchers control desk and both the driver and the biker are able to choose their own routes from the origin to the destination, interacting with each other in real-time from their individual perspectives. The aim is to replicate an experience as close to reality as possible.

The VR Design Studio software enables researchers to create and edit the entire road network elements. These include road alignments, intersection design, traffic signals, cross sections, roadside signs, terrain setup, day or night-time, weather, road-surfaces and traffic volumes.

SABA is recruiting at least 30 people from the Baltimore area who will act as the drivers and riders for the duration of the project, explained Dr Mansoueh Jeihani who is leading the project.

“We installed the first FORUM8 drive simulators in 2011 and found the technology easy to use and capable of producing detailed and realistic visualisations,” he said. “Key features for us in choosing the cycle simulator include the ability to link the different simulators in a shared network as well as the range of third-party software plug-ins that is supported by VR Design Studio.

“When we needed to enhance the range of traffic flow options, we were able to seamlessly integrate it with the traffic micro-simulation software S-Paramics as well as the latest eye-tracking software to add further important dimensions to our research,” said Jeihani.

For more information on companies in this article

Related Content

  • Weighty matters for developing countries
    November 6, 2012
    One leading Weigh in Motion technology manufacturer is helping governments in developing countries reduce excessive road damage, while several others have seen their latest WIM systems recently used on the highways of Eastern Europe. Guy Woodford reports Recent Central Weighing WIM installations in Bangladesh are helping its national government reduce the financial burden of excessive road damage, while also protecting many bridges that are vital to transport and trade. The need for such installations was e
  • Vitronic at German test track
    January 7, 2022
    Vitronic has installed sensor technology along a designated Test Track for Automated and Connected Driving – TAVF – on a public road in Hamburg, Germany. This test installation aims to contribute to optimising traffic flow and increasing road safety, particularly vulnerable road users such as pedestrians and cyclists, on a busy road about 2km from the main railway station.
  • Massenza’s new vision for 2014
    March 12, 2014
    Massenza has started 2014 with a new approach to its range of bitumen emulsion plants, streamlining its four larger models into two, and adding a smaller plant. This has allowed Massenza to optimise the design and components for each size of plant, which in turn allows the company to offer its customers a more competitive deal. At the same time, Massenza has made three major technical improvements to the plants: a new type of material for the water tank which resists corrosion; a new dosing system for th
  • SequoIA to use DAS for traffic management
    January 19, 2024
    SequoIA Analytics, a startup company within France’s Inria - National Research Institute for Digital Science and Technology – is using fibre-optic cable to provide better traffic data.