Skip to main content

Royal treatment for Hull’s Princes Quay Bridge

Finishing touches are being put on Princes Quay Bridge in the northern English city of Hull, in East Yorkshire county, for opening this spring.
By David Arminas January 30, 2020 Read time: 2 mins
The Princes Quay Bridge for cyclists and pedestrians sits over the A63 in the English city of Hull

The €14 million bridge spans the A63 and, when open, will enable pedestrians and cyclists to cross over the busy dual carriageway.
 
The assembled 60m-long bridge – weighing 150tonnes - was delivered to its final position last November and then manoeuvred through closed streets into position over the A63 during a single night. The marina platform has been completed, the supports for the steel ramps have been installed and construction has started on the bridge ramps and stairs.
 
Concrete work on the bridge, laying the paving, landscaping and finishing the ramps will complete the project for an opening something this spring.

The Highways England project, which is the first phase of the A63 Castle Street road improvement scheme, will shape the future of Hull and connect key sites in the city. The bridge is expected to open in the spring which will signal the start of the main scheme.
 
The proposed €417 million main scheme will create a junction by lowering the level of the A63 at the Mytongate junction. Ferensway and Commercial Road will cross the A63 creating a split-level junction.

Between Princes Dock Street and Market Place the proposal is to widen the eastbound carriageway to three lanes and build another footbridge over the A63, this time at Porter Street.

Related Content

  • Advanced method for South Africa bridge construction
    May 16, 2016
    A sophisticated construction method has been used for the first time in South Africa for a suspended bridge project This novel method of bridge construction was used on a major road upgrade project for the South African National Roads Agency Limited (SANRAL). Main contractor Lonerock Construction, and subcontractor Tzandeboo Construction, used RMD Kwikform’s Megatruss system to construct a 60m-long bridge while suspended mid-air over the live N4 highway. Lonerock Construction’s US$8.5 million (R132
  • Tanzania’s work on East Africa’s multi-national road project
    November 28, 2022
    Tanzania is kick-starting construction work on the missing link in East Africa's multinational road
  • New UK dual carriageway opening
    December 20, 2016
    Drivers in the UK are to benefit from the opening of a new dual carriageway connection. The section of road is a key route for Highways England, improving the connection between junction 19 of the M6 and junction 7 of the M56 motorways. The new A556 Knutsford to Bowdon link road will cut congestion and journey times for drivers in the area. As part of the £192 million project to build the new dual carriageway between, Highways England has remodelled slip roads at Yarwood Heath and Bowdon roundabouts. The
  • Cleveland Bridge on A1 project in the UK
    February 7, 2017
    Cleveland Bridge UK has delivered a significant upgrade project on the A1 in North Yorkshire, England, with the fabrication and installation of eight bridges. Using British-made steel, the 20-month project was completed with the installation of the 53m Fort Overbridge. The work was carried out on behalf of Highways England’s principal contractor on the A1 scheme, a Carillion and Morgan Sindall joint venture. The A1 Leeming to Barton upgrade is replacing the dual carriageway with a three-lane motorw