No flash in the pan

Carmanah Technologies Corporation claims its new R920 Rectangular Rapid Flashing Beacon (RRFB) has features proven to significantly improve crosswalk safety. The pedestrian-activated system provides a high-intensity rapid flash pattern to alert vehicles approaching a crosswalk that pedestrians are present. The R920 RRFB Series adds to what Carmanah describes as its industry proven line of solar flashing beacons which have been successfully used by City, County, and DOT (Department of Transportation) Agencie
August 13, 2012 Read time: 2 mins
2798 Carmanah Technologies Corporation claims its new R920 Rectangular Rapid Flashing Beacon (RRFB) has features proven to significantly improve crosswalk safety.

The pedestrian-activated system provides a high-intensity rapid flash pattern to alert vehicles approaching a crosswalk that pedestrians are present. The R920 RRFB Series adds to what Carmanah describes as its industry proven line of solar flashing beacons which have been successfully used by City, County, and DOT (Department of Transportation) Agencies in the US, Canada, and internationally for over a decade.

Traffic Engineers and Planners are said by Carmanah to have struggled with the ‘dilemma’ of crosswalk safety since a landmark study published by the 2410 Federal Highway Administration (FHWA) in 2005 found that once vehicle volumes and speeds exceeded a certain threshold, a crosswalk with basic pavement markings and signage was associated with a higher pedestrian crash rate compared to having no crossing at all. For many of these situations, the dilemma is that a traffic signal is too costly and often is not warranted; standard crosswalk signs and markings alone are not effective; and, Carmanah claims until the RRFB, the various active warning systems available have been either cost-prohibitive, marginal in effectiveness, or both.

The FHWA has issued an interim approval of the R920 RRFB within the Manual of Uniform Traffic Control Devices (MUTCD), following an extensive study that monitored the effectiveness of the devices over a two-year period. Carmanah chief executive, Bruce Cousins, said the R920 RRFB had been designed with the company’s latest solar, LED, and wireless technology.

“Our goal is to deliver a product that can be installed for a fraction of the cost of a traditional AC powered system, which will enable cities and other traffic agencies to improve safety at significantly more crosswalks than previously possible,” said Cousions.

The R920 RRFB was due to be showcased at the IMSA (International Municipal Signal Association) Annual Conference, July 28-31 in Orlando, Florida.
Highway & Network Management

For more information on companies in this article

Related Content

  • Transports costs and lives can be saved through road maintenance
    November 27, 2013
    A group has united with a common aim, that roads must be maintained to save lives and money. The European Commission and national governments are being called upon to step‐up road maintenance standards by organisations, which represent consumers, road and vehicle industries, and safety bodies. The group comprises the Féderation International de l'Automobile (FIA), the European Road Federation (ERF), the International Road Transport Union (IRU) and the European Automobile Manufacturers’ Association (ACEA), a
    Read More
  • Rising to the challenge
    July 18, 2012
    Visualise today's concept of a major commercial traffic corridor in the western United States. A roadway responsible for delivering goods to Arizona, Nevada and Utah, that also connects Mexico to the United States to Canada through the North American Free Trade Agreement (NAFTA). What springs to mind? A multi-lane highway carrying thousands of vehicles a day past cities at speeds up to 113km/hour, while egress ramps make sure vehicles get safely to city streets and their final destination. This is not the c
    Read More
  • Securing safer transportation infrastructure through non-destructive technology
    June 16, 2014
    Kevin Vine reports on the use of non-destructive testing for structural analysis of bridges Seven years ago, the overpass collapse in Laval, Québec that led to the death of five people brought to light severe issues with the state of the country’s bridges and transportation infrastructure. More recently, a crack in the Champlain Bridge to Montreal that forced over 160,000 commuters to find alternate routes to work reaffirmed a need for greater emphasis on early detection before a crisis occurs.
    Read More
  • Hot Bitumen Safety – Still an Issue, Eleven Years On
    April 22, 2016
    Despite clear industry guidelines published over a decade ago and revised in 2015, level measurement experts Hycontrol still regularly encounter asphalt plants with insufficient safety protocols for preventing spills of hot bitumen. Introduction – Bitumen Storage in the UK Recently-issued information from Eurobitume UK has reinforced the need for stringent safety precautions on sites with bitumen storage facilities; key amongst them being the implementation of a robust level monitoring and alarm system (‘Si
    Read More

Highlighted Content