Skip to main content

Navtech Radar to showcase ClearWay radar-based safety and monitoring systems

Navtech Radar will be showcasing the safety and economic benefits of using longer-range radar systems for Automated Incident Detection (AID) and enforcement at Intertraffic 2012. The company’s ClearWay sensor technology is currently deployed in live tunnel and above-ground environments in Northern Europe and has been further developed to provide count and classification capabilities as well as an effective counter to illegal tailgating and unsafe lane-change manoeuvres.
March 19, 2012 Read time: 3 mins
4066 Navtech Radar will be showcasing the safety and economic benefits of using longer-range radar systems for Automated Incident Detection (AID) and enforcement at 244 Intertraffic 2012. The company’s ClearWay sensor technology is currently deployed in live tunnel and above-ground environments in Northern Europe and has been further developed to provide count and classification capabilities as well as an effective counter to illegal tailgating and unsafe lane-change manoeuvres.

A key feature of radar, says company director Steve Clark, is that it will enable road and tunnel managers to continue to monitor their networks in conditions which will defeat video, whilst providing wide-area detection and monitoring capabilities which loop-based systems cannot.

“Our millimetric-wave ClearWay radar systems provide the AID solution for the Hindhead Tunnel in the UK – a world-first application – and are also used on the E4 motorway near Stockholm in Sweden, where there is a need for a cost-effective, long-range solution able to detect incidents at locations where inclement weather often results in very poor visibility.”

Navtech Radar’s systems can detect vehicles, people and debris at up to 500m. Because they provide 360° coverage, a single system can therefore monitor up to 1,000m of open highway. This makes it a very cost-effective choice, allowing longer stretches of road to be monitored with fewer installed systems. In tunnels and at portals in particular, variable light conditions or dust and haze are no barriers to performance.

The company also develops and supplies the back-office systems and algorithms which support the applications offered, and visitors to Intertraffic will be able to view video demonstrations of the ClearWay system in operation as well as examples of the ClearWay radar head.

“A common misconception is that video is needed for AID but the Hindhead Tunnel application proves that isn’t so,” Clark continues. “There, radar is being used to provide alerts and direct the PTZ camera systems which enable the tunnel’s operators to see what’s going on. And it’s doing so with very low false alarm rates, which proves the technology’s viability from an operator perspective. That was a major factor in radar being selected by 1096 Trafikverket, Sweden’s national transport administration, for use on the E4. Parts of the motorway around Stockholm operate without hard shoulders. That creates a need, especially when visibility is poor, to detect and react very swiftly to incidents in the running lanes.”

Recent trials have successfully demonstrated the ability to detect illegal driving manoeuvres in tunnels. This is all part of efforts to add further value to the product, Clark continues.

“The current trend is towards above-ground detection systems and we’ve already added count and classification capabilities to the product. We’ve also been engaged in trials with a Taiwanese integrator to assess radar’s ability to enforce against tailgating and illegal lane changes in tunnels. The results have been very positive and that capability is now also market-ready.”

ClearWay is very easy to integrate with other systems. In Sweden, for instance, it forms a part of the integrated AID system within the national traffic management system which UK consultancy 4067 Nicander maintains on behalf of Trafikverket. However, over the course of the next 12 months Navtech Radar will be adding shorter-range products to its portfolio. These will be optimised for tunnel geometries and locations where lines of sight are limited. They will further increase radar’s cost-effectiveness and allow users to address different applications and scenarios using a common set of products, says Clark.

For more information on companies in this article

Related Content

  • New marking technologies being developed
    June 30, 2014
    Innovative roadmarking technologies will increase productivity, improve conspicuity in poor conditions and offer increased wear life - Mike Woof writes. Major advances have been seen in roadmarking systems now being offered on the market. More sophisticated machinery will increase productivity and quality when installing markings, while new systems will also last longer in use. In addition, smart technologies can detect wear and provide highway authorities with an accurate picture of network safety, at comp
  • Road safety improving, but vulnerable road users need protection
    January 11, 2013
    Preliminary data from France over the number of fatalities on the road network reveal safety improvements during 2012. The numbers killed dropped by 7-8%, although the final figures for December are not yet available. The preliminary figures suggest that around 3,600-3,700 were killed on French roads in 2012, compared with 3,970 in 2011. This reduction is in line with targets on cutting the death rate and Ministry of the Interior wants to bring the fatality rate to just 2,000 by 2020. This reduction has bee
  • Positioning tools continue to improve
    July 16, 2012
    Topcon says that its new IP-S2 package combines GNNS positioning capabilities with inertial sensors, while the firm also has a solution for customers wanting to mix and match receiver components. The IP-S2 is a vehicle-mounted, mobile 3D tool that offers precision mapping and surveying capabilities. The package collects data using 3D laser scanners, LIDAR, and/or cameras, and this is then integrated, time-stamped and geo-referenced. The customer can use this assembled data to combine LIDAR point cloud and d
  • SICK can help boost tunnel safety
    January 5, 2016
    Tunnel operators and owners can use SICK’s novel tunnel monitoring technology to provide early warnings of unsafe visibility and pollution conditions inside tunnels. This can help ensure the safety of vehicle occupants and tunnel staff. The SICK VISIC100SF visibility, carbon monoxide and nitric oxide (CO/NO) sensor is a tunnel environment monitor and combines scattered light measurement with electrochemical cell sensing in a single, compact housing. The firm says that the SICK VISIC100SF enables tun