Skip to main content

IRD wins Georgia state weigh-in-motion deal

International Road Dynamics (IRD) will design, supply and install 19 mainline weigh-in-motion systems throughout the US State of Georgia. IRD, based in the city of Saskatoon in the Canadian province of Saskatchewan, said the contract is worth US$7.93 million. The deal includes mainline WIM scales on the interstate, at the roadside and in scale houses as well as license plate reading, USDOT number reading, side view cameras and over-height detection systems at 19 weigh station locations. IRD’s systems will c
March 9, 2015 Read time: 2 mins
3508 International Road Dynamics (IRD) will design, supply and install 19 mainline weigh-in-motion systems throughout the US State of Georgia.

IRD, based in the city of Saskatoon in the Canadian province of Saskatchewan, said the contract is worth US$7.93 million.

The deal includes mainline WIM scales on the interstate, at the roadside and in scale houses as well as license plate reading, USDOT number reading, side view cameras and over-height detection systems at 19 weigh station locations.

IRD’s systems will complement the automated ramp weigh station facilities previously provided by IRD and operated by the Georgia Department of Transport.

Information from the new systems will be sent to the 3328 Georgia Department of Transportation Traffic Management Centre, Georgia Department of Public Safety/Motor Carrier Compliance and other state organisations.

Construction will start this year at truck weigh stations in Carroll County (I-20 westbound), Troup County (I-85 northbound and southbound), Douglas County (I-20 eastbound) and Catoosa County (I-75 northbound and southbound).  Construction of the remaining weigh station sites is expected to be completed by the end of 2016.

IRD will also provide maintenance for five years.

IRD president and chief executive Terry Bergan told local media that these types of deals take years to finalise and can lead to upgrades if all parties are happy with the work. He pointed to IRD’s relationship with the US state of Oregon where the company has outfitted 27 weigh stations, maintained the equipment and upgraded projects in the state for the past 18 years.

In November 2011, IRD won US$1.73 million contract with the Arizona Department of Transportation’s Mariposa Port of Entry at the US-Mexico border crossing near Nogales, Arizona.

The port-of-entry screening system included the supply of WIM scales, licence plate readers, USDOT readers, automatic vehicle identification and EPIC - expedited processing at international crossings - system. The installation prescreens vehicles that pass over each of the seven lanes at the border crossing.

Also in 2011, IRD was awarded a contract for WIM systems maintenance and data services by the US Department of Transportation’s Federal Highway Administration. The four-year deal has potential revenue for IRD of around $50 million.

For more information on companies in this article

Related Content

  • WiM eases bridge health worries
    July 31, 2024
    Ageing road bridges are leading road authorities to consider the case for using weigh-in-motion - WiM - solutions to monitor the health of such infrastructure, writes Adam Hill.
  • US city of Vancouver approves new I-5 bridge
    July 18, 2022
    Vancouver in the US state of Washington and Portland in the state of Oregon are aiming for a new road bridge with the possibility of accommodating light rail transport.
  • Dynaweigh’s flashy WiM system
    October 4, 2023

    Batsch Dynaweigh says its truck scales HHB01 and HHB02 for dynamic detection of overloaded vehicles has a legal verifiable accuracy of +/- 1% (class 2D). This meets the requirements of the OIML R134 regulations for automatic instruments for weighing road vehicles in motion and measuring axle loads.

    For Dynaweigh’s popular HHB01 and HHB02 scales – eight years in development – the total weight and axle loads are recorded automatically during crossing at up to 35km/h.

  • Machine control technology shortens road contract
    May 28, 2013
    The use of sophisticated machine control technology has helped halve the schedule required for a road contract – Jeff Winke. By using the latest machine control systems on the equipment fleet, a US contractor has managed to halve worker hours, machine time and overall costs. “We chopped 50% off the contract schedule,” said Jim Swenson, licensed professional land surveyor for Oregon Mainline Paving based in McMinnville, Oregon. “The project was completed a year ahead of the two-year schedule,” he explained.