Skip to main content

Advanced road drainage system

An advanced approach to maintenance is helping ensure that the UK county of Kent keeps on top of road drainage. Kent Highway Services (KHS) has a network of some 8,400km of roads and drains, which requires a fleet of vehicles to maintain and support. In order to keep traffic moving and avoid flooding hazards for motorists, road drainage systems have to be consistently monitored and maintained. Previously this was carried out on a reactive basis, but this has proved to be neither cost effective nor efficient
April 10, 2012 Read time: 2 mins
An advanced approach to maintenance is helping ensure that the UK county of Kent keeps on top of road drainage. Kent Highway Services (KHS) has a network of some 8,400km of roads and drains, which requires a fleet of vehicles to maintain and support. In order to keep traffic moving and avoid flooding hazards for motorists, road drainage systems have to be consistently monitored and maintained. Previously this was carried out on a reactive basis, but this has proved to be neither cost effective nor efficient. To manage this task more effectively KHS needed to capture data about locations and conditions of the drains in order to plan cost effectively for maintenance and repairs.

Using geographic information system technology (GIS), 212 esri UK worked with KHS to make this information readily available. Using ESRI UK's ArcPad solution, KHS can now access and record exact locations of drains and conditions and ensure maintenance is carried out without unnecessary costs. The GIS technology allows KHS to calculate efficient routes depending on the location and condition of the drains. This enables efficient maintenance, whilst improving the safety of the highways and reducing vehicle mileage.

ESRI now has a full case study of Kent Highway Services work with the firm and can provide insight into how GIS is becoming a cost effective and vital resource.

For more information on companies in this article

Related Content

  • Dowel bar drilling selection poses challenges
    January 11, 2013
    Pneumatic concrete dowel drills have one purpose – to drill holes. While their intended use is easy to recognize, operation of this equipment isn’t quite so simple. In fact, it’s a bit of a science. That’s not to say they’re difficult to operate. But there are certain best practices and processes to keep in mind for proper drill operation, whether it’s an on-grade, slab-rider or equipment-mounted model. Operators who adopt these guidelines and implement them on every job are rewarded with better performance
  • Connected Tech for Construction Continuity
    December 11, 2020
    No one could have predicted the situation we found ourselves in in 2020, with a global pandemic bringing the economy to its knees, projects delayed overnight, rapid restarts, remote management, and challenging labor dynamics.
  • Prized recycling
    June 13, 2012
    Wirtgen has won the US Cold Recycling Award 2012 for applying its cold recycling structural road rehabilitation technology on Interstate I-81 in eastern America. The I-81 is one of the major north-south routes running across Virginia state with two lanes in each direction. Increasing traffic volumes and the loads imposed by heavy-vehicle traffic were said by the Virginia Department of Transportation (VDOT) to have left the pavement surface covered with alligator cracks, wheel ruts and patches where minor re
  • New report suggests older drivers are safe
    December 4, 2012
    A new report by the Institute of Advanced Motorists (IAM) in the UK suggests that older drivers are as safe as drivers from all other age groups, and perhaps more so. The study shows older drivers have better attitudes to safety, deal with hazards better than young drivers and use experience to increase their safety margins on the road. The report reveals that drivers over 75 react just as quickly as other age groups when a vehicle emerges from a side road or if the car in front brakes suddenly on a rural r