Skip to main content

New traffic solutions for the UK

Two major developments being introduced will help optimise traffic flow on routes carrying high volumes of vehicles/day. An installation of Flexicon’s flexible conduit will help keep the traffic flowing on one of the busiest sections of the M6 motorway through Birmingham by protecting power and data cabling for overhead gantries and CCTV cameras. On behalf of Highways England, who is implementing a hard shoulder running scheme between junctions 5 and 8, contractor’s Carillion is using the 63mm diameter L
July 15, 2015 Read time: 3 mins
New VMS solutions are being offered by Swarco
Key traffic innovations will help keep vehicles flowing on the UK’s busy roads

Two major developments being introduced will help optimise traffic flow on routes carrying high volumes of vehicles/day. An installation of Flexicon’s flexible conduit will help keep the traffic flowing on one of the busiest sections of the M6 motorway through Birmingham by protecting power and data cabling for overhead gantries and CCTV cameras.

On behalf of 8100 Highways England, who is implementing a hard shoulder running scheme between junctions 5 and 8, contractor’s 2435 Carillion is using the 63mm diameter LPC flexible conduit for three purposes. This will run cables from ground level to the cable trough in the bridge deck on the viaduct above.  From here the cables will be routed through a parapet into the gantries and CCTV cameras.  

Carillion will also use the conduit to provide cross carriageway ducts from one side of the viaduct to the other, a distance of about 35 metres. These duct routes provide a continuous cable route from the existing infrastructure to new structures, so there is no need to access underneath or above the viaduct for any recabling.

Dalvier Chana, Construction Manager for Carillion said, “By having the cable routed in continuous ducts, it will allow future replacement or upgrading of cables without having to work at height over the side or underneath the viaduct.“

Reliability and long life was a key requirement for conduit since it needs to protect the cabling from UV degradation and water ingress plus potential theft or vandalism.  The cable ducts need to have a lifetime of at least 15 years. The LPC conduit supplied is UV resistant and has an IP rating of IP66, IP67 and IP68.
As Flexicon is a UK manufacturer it can offer its customers tailored solutions.  For this project the conduit was supplied cut to length to save the customer installation time on site.

Tim Creedon, sales and marketing director for Flexicon said, “When considering cable protection for long-term projects such as this, it is vital to consider all of the hazards faced and specify accordingly. With 52 different conduit systems to choose from, in both metallic and non-metallic options, we have a solution for almost any situation.”

Meanwhile, many early generation variable message signs (VMS) are now reaching end of life and are either failing completely or becoming extremely difficult to maintain, 337 Swarco Traffic has launched a new service to repair and renovate life expired VMS.

According to Swarco, the cost of buying new is too great, making repair and renovation a novel proposition. A project is currently underway with one municipal authority to repair up to 40 signs, some of which were installed up to 20 years ago.  

Jeremy Cowling, managing director of Swarco Traffic, explained that where possible, original equipment and enclosures are retained, but new electronics and LEDs fitted. “This process enables full functionality of the sign to be restored,” he said.

“The result is improved reliability; the signs become easier to maintain and spare parts are now more readily available. The performance characteristics of the new equipment are often better than when the signs were first installed and there is an opportunity to reduce power consumption.  

“By offering a new service, to repair, renovate and reinstall existing equipment, we can help local authorities to address an immediate need with a cost-effective and pragmatic solution.”

For more information on companies in this article

Related Content

  • Paving smarter with LeeBoy equipment
    April 20, 2018
    A highway widening project in the US state of New Hampshire is being assisted by the use of a gravity-fed asphalt paver. The widening work is being carried out as part of an upgrade for a 32km stretch of I-93, which was started eight years ago. The work is being carried out for the New Hampshire Department of Transportation (NHDOT) on a section of the highway between Exits 1 and 5 from the Massachusetts Stateline to Manchester, NH. According to NHDOT, the project involves widening I-93 from two lanes in
  • The A14 Cambridge to Huntingdon improvement scheme takes shape
    May 31, 2017
    Highways England’s project manager gives sneak peek into progress on the UK’s biggest road upgrade now under construction. Road construction workers often find interesting buried items when building roads and the UK’s A14 Cambridge to Huntingdon improvement scheme is proving the point. It’s been less than half a year since construction started on the €1.76 billion A14 scheme, Highways England’s largest ongoing project. Highways England is the wholly government-owned company responsible for modernising, main
  • England’s A14 project River Great Ouse Viaduct completed
    February 28, 2019
    Construction of the biggest bridge in Highways England’s €1.73 billion A14 Cambridge-to-Huntingdon upgrade has been completed. The River Great Ouse Viaduct stretches for 0.8km and when opened to traffic next year will take the new A14 road over the floodplain and the East Coast Mainline Railway line. Work began in November 2016 on the bridge that is part of a new 27.4km bypass under construction to the south of Huntingdon and away from the existing A14. The road is being widened to three lanes in both
  • Cummins completes China collection
    November 21, 2018
    Cummins has showcased a full line of China Nonroad Stage IV emissions engines with the unveiling of the upgraded high performance 8.9-litre L series engine. The unit moves up to 298kW with a peak torque of 1800Nm – an 11% increase on its predecessor – and offers class-leading fuel economy and the ability to run at high altitudes while maintaining power capability. Cummins full line-up of engines for the new China Nonroad Stage IV emissions standard spans 2.8 to 15 litres displacement with a power capabili