Skip to main content

New traffic solutions for the UK

Two major developments being introduced will help optimise traffic flow on routes carrying high volumes of vehicles/day. An installation of Flexicon’s flexible conduit will help keep the traffic flowing on one of the busiest sections of the M6 motorway through Birmingham by protecting power and data cabling for overhead gantries and CCTV cameras. On behalf of Highways England, who is implementing a hard shoulder running scheme between junctions 5 and 8, contractor’s Carillion is using the 63mm diameter L
July 15, 2015 Read time: 3 mins
New VMS solutions are being offered by Swarco
Key traffic innovations will help keep vehicles flowing on the UK’s busy roads

Two major developments being introduced will help optimise traffic flow on routes carrying high volumes of vehicles/day. An installation of Flexicon’s flexible conduit will help keep the traffic flowing on one of the busiest sections of the M6 motorway through Birmingham by protecting power and data cabling for overhead gantries and CCTV cameras.

On behalf of 8100 Highways England, who is implementing a hard shoulder running scheme between junctions 5 and 8, contractor’s 2435 Carillion is using the 63mm diameter LPC flexible conduit for three purposes. This will run cables from ground level to the cable trough in the bridge deck on the viaduct above.  From here the cables will be routed through a parapet into the gantries and CCTV cameras.  

Carillion will also use the conduit to provide cross carriageway ducts from one side of the viaduct to the other, a distance of about 35 metres. These duct routes provide a continuous cable route from the existing infrastructure to new structures, so there is no need to access underneath or above the viaduct for any recabling.

Dalvier Chana, Construction Manager for Carillion said, “By having the cable routed in continuous ducts, it will allow future replacement or upgrading of cables without having to work at height over the side or underneath the viaduct.“

Reliability and long life was a key requirement for conduit since it needs to protect the cabling from UV degradation and water ingress plus potential theft or vandalism.  The cable ducts need to have a lifetime of at least 15 years. The LPC conduit supplied is UV resistant and has an IP rating of IP66, IP67 and IP68.
As Flexicon is a UK manufacturer it can offer its customers tailored solutions.  For this project the conduit was supplied cut to length to save the customer installation time on site.

Tim Creedon, sales and marketing director for Flexicon said, “When considering cable protection for long-term projects such as this, it is vital to consider all of the hazards faced and specify accordingly. With 52 different conduit systems to choose from, in both metallic and non-metallic options, we have a solution for almost any situation.”

Meanwhile, many early generation variable message signs (VMS) are now reaching end of life and are either failing completely or becoming extremely difficult to maintain, 337 Swarco Traffic has launched a new service to repair and renovate life expired VMS.

According to Swarco, the cost of buying new is too great, making repair and renovation a novel proposition. A project is currently underway with one municipal authority to repair up to 40 signs, some of which were installed up to 20 years ago.  

Jeremy Cowling, managing director of Swarco Traffic, explained that where possible, original equipment and enclosures are retained, but new electronics and LEDs fitted. “This process enables full functionality of the sign to be restored,” he said.

“The result is improved reliability; the signs become easier to maintain and spare parts are now more readily available. The performance characteristics of the new equipment are often better than when the signs were first installed and there is an opportunity to reduce power consumption.  

“By offering a new service, to repair, renovate and reinstall existing equipment, we can help local authorities to address an immediate need with a cost-effective and pragmatic solution.”

For more information on companies in this article

Related Content

  • Formwork innovations help bridge building
    July 7, 2015
    A series of formwork developments are helping with challenging bridge construction projects around the world - Mike Woof writes In the Polish city of Krakow, a cost-effective cable stayed bridge is being constructed using a balanced cantilever technique. The current expansion of the Krakow metropolitan railway network (KST) requires the building of a crossing of the Krakow-Plaszow railway junction. Ensuring that daily rail operations remained unaffected during the construction of the 252m long crossing w
  • Highways England launches Maintenance Assistance Vehicle - MAV
    July 7, 2016
    Highways England has developed a vehicle to help replace overhead highway signs that it says will reduce the need to close lanes and roads during work The vehicle uses a hydraulic scissor lift similar to that seen on catering vehicles that load food into the hold of airplanes at airports. Traditionally, signs are taken down and installed using a flatbed truck, crane and cherry picker, taking up to 40 minutes. However, the Maintenance Assistance Vehicle (MAV) can do this in around 20 to 25 minutes by usin
  • New chapter for bituminous slurry in Colombia
    January 11, 2019
    Colombia’s San Rafael road concessionaire is using its first VSB Macropaver 12B unit to maintain a road carrying heavy traffic volumes – Enrique Saez writes The use of bituminous slurry for road maintenance works in Colombia is taking a new step forward with the purchase of equipment from VSS Macropaver by road contractors in the country. Engineer Ezequiel Romero, manager of the concessionaire San Rafael, explained that the application of bituminous grout has delivered major benefits for the firm. The c
  • Mobile grouting trailers for soil nail rigs
    February 7, 2012
    Geotechnical specialists, Bachy Soletanche and Carillion Piling are currently working on an £18 million (e21 million) geotechnical contract as part of carriageway improvements on the M1 motorway to the north of London, England. The work between junctions 10-13, Luton to Milton Keynes, is being carried out for the Costain Carillion joint venture working on behalf of the Highways Agency. The piling and soil nailing works are to facilitate the conversion of the current hard shoulder to a peak-time running lane