Barrier removal

A novel use of a scrap shear has helped safety upgrades for the A14 highway linking the Italian cities of Bari and Naples. A Promove SC2200 scrap shear has been used to cut and remove old steel guard-rail on the highway.
April 5, 2012 Read time: 1 min
High speed cutting was achieved using the Promove scrap shear, allowing old barrier sections to be removed from an Italian highway
RSSA novel use of a scrap shear has helped safety upgrades for the A14 highway linking the Italian cities of Bari and Naples. A 2689 Promove SC2200 scrap shear has been used to cut and remove old steel guard-rail on the highway.

The 2.5tonne cutter was mounted on a CAT M322D wheeled excavator and was able to cut the sections extract poles and load scraps on a truck waiting just slightly ahead of the cutting zone. The operation was carried out in a single lane as the highway was not closed and traffic was diverted onto another lane.

However the operator made sure that the excavator stayed within the limitations of the working area, ensuring safety for the vehicles driving past.

The SC2200 unit worked fast and productively, allowing the full highway width to be reopened in time for heavy holiday traffic. In addition the unit's 360° hydraulic-powered rotation allowed the driver to position the shear for cutting and to safely load the cut sections onto the truck.
Road Markings, Barriers & Workzone Protection Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Caterpillar Paving offers a guide to efficient night time paving practices
    October 3, 2014
    Efficient night-time paving operations can reduce construction costs and cut traffic delays - *Todd Mansell writes As roads become more congested, the user cost of daytime lane closures to accommodate road construction and paving has increased dramatically. One solution to lower user costs associated with traffic delays is to carry out more paving at night during off-peak times. However night-time paving brings new challenges to producing quality work in safely.
    Read More
  • High speed bridge demolition minimises disruption
    February 16, 2012
    A high speed bridge demolition project has been carried out successfully in Germany. Speed was of the essence as the bridge spanned an important road link and had to be removed in a tight time frame, minimising disruption to traffic.
    Read More
  • Sunderland’s New Wear Crossing takes shape
    February 16, 2017
    The New Wear Crossing will be the first bridge to be built over the River Wear in Sunderland, UK, for more than 40 years Raising the bridge’s 100m-tall pylon promised to be a stunning visual sight, but also a tricky operation dictated by extremely variable local weather. World Highways went to press just before the operation, but not before the pylon had arrived by barge on January 7. It had completed a two-day crossing of the often unpredictable North Sea from the Belgian port of Ghent where it was f
    Read More
  • Concrete barriers help to minimise accidents
    July 12, 2012
    Concrete barriers offer a highway safety solution - Mike Woof writes. Concrete safety barriers are being installed on many of Europe's major highways, particularly for use as centre lane dividers. The strength and durability of concrete barriers can help reduce the risk of cross over accidents, one of several topics raised at a conference in Brussels on concrete highway barriers organised by the European Concrete Paving Association, EUPAVE. The conference was opened by Yves Deceoene of the IRF's Belgian ex
    Read More

Highlighted Content