The Quill Falcon Cyclone 60 Trailer system is a blast

The Quill Falcon Cyclone 60 Trailer water blasting system efficiently removes road markings and anti-skid coatings without scorching or scarring highway surfaces. According to the manufacturer, the portable Falcon Cyclone 60 is the most convenient of the Quill Falcon range because it comprises a Quill Falcon Cyclone 60 unit, a 115litre water tank and a 90cfm or 140cfm compressor. It provides everything contractors need to start blasting almost immediately. Applications include the removal of permanent and
July 3, 2019 Read time: 2 mins
Pretty good: no scars with the Quill Falcon Cyclone 60 Trailer water blasting system
The Quill Falcon Cyclone 60 Trailer water blasting system efficiently removes road markings and anti-skid coatings without scorching or scarring highway surfaces.


According to the manufacturer, the portable Falcon Cyclone 60 is the most convenient of the Quill Falcon range because it comprises a Quill Falcon Cyclone 60 unit, a 115litre water tank and a 90cfm or 140cfm compressor. It provides everything contractors need to start blasting almost immediately.

Applications include the removal of permanent and temporary thermoplastic paint, temporary road marking tape, surface dressing emulsion, resin based paints and anti-skid surfacing. It removes them from both the road surface and voids within the road surface.

The UK-made system does no damage to the surface, such as scorching and scarring. Importantly, there is no smoke or dust cloud that can lead to expensive clean-ups after the removal job is completed. Also, visibility in the area of work remains high enabling other trades to continue their work in close proximity to the Falcon Cyclone 60.

Water Consumption is between 100-150ml per minute and the grit type is standard particle blast media. Grit consumption is up to 1kg per minute with a refill of grit required around every three hours, depending on the operation of the system. The 25mm-diameter blast hose has a maximum length of 80m.

The number of 25kg bags of media to fill the vessel is around four bags of garnet, three bags of iron silicate and two bags of glass.

Travel dimensions of the Quill Falcon Cyclone 60 Trailer system are 1,530mm in height, 2,000mm in width and 3,050mm in length. Weight when fully loaded is around 1,240kg.

Road Markings, Barriers & Workzone Protection

Related Content

  • Estonia surveys major roads with a RetroTek-M retroreflectometer
    May 22, 2019
    During the past two years, Estonia’s Road Administration has clocked up 4,021km during a retroreflectivity project on all main state roads and on basic roads. Estonia’s Road Traffic Development Department of the Estonian Road Administration has been working with ERC Consulting to gather retroreflectivity data on road markings on all main state roads and basic roads. The work has shown that out of 1,609km of main state roads, 20% had problems. The reflective effect is created by glass beads on the surf
    Read More
  • Extraction operation benefits from haul road improvement
    May 23, 2014
    The trial of a novel compound at a site in Chile has shown how structural improvements can be achieved for dirt road applications Although the Barrick Gold Pascua Lama operation is a surface mining site, the experience with this technology is equally applicable for use on haul roads in large quarries or for dirt roads expected to carry heavy loads. This is of particular importance for transport in remote areas where large loads such as pre-cast bridge sections or girders for example may have to be carrie
    Read More
  • Increased use of reclaimed asphalt, reduced emissions
    February 10, 2012
    Reducing emissions and increasing the use of reclaimed asphalt pavement is among the key aims of plant manufacturers. Patrick Smith reports. Lower emissions and the use of recycled materials coupled with reduced costs are the aims of manufacturers of modern asphalt plants.
    Read More
  • Novel concrete paving method used in Germany
    January 25, 2017
    A novel dual-layer concrete paving technique has been used on jobsites in Germany on the country’s high-speed Autobahn network This technique allows the construction of a strong and durable roadway structure able to cope with heavy traffic loads and offer a long working life. In four German states, Wirtgen SP-1500 slipformers have been employed by four different contractors to carry out dual-layer paving. The method allows a noise-reducing, non-skid exposed aggregate surface to be placed over a bottom
    Read More

Highlighted Content