Skip to main content

London swings with SwiftGates

Versilis’s SwiftGates will be operating for the 1.83km Hindhead Tunnel, the longest under-land road tunnel in the UK.
By David Arminas February 2, 2022 Read time: 2 mins
SwiftGate is a series of swing gates which automatically close off lanes in only minutes

England’s National Highways agency has installed the swinging SwiftGate barrier system, made by Versilis, at the A3 Hindhead Tunnel just outside London.

SwiftGate is a series of swing gates which automatically close off lanes in only minutes and saves road workers having to put out cones in the face of oncoming traffic.

National Highways said SwiftGate - made by Versilis - can be fully deployed in around five minutes compared to the 25 minutes it takes road workers to put out the taper of cones directing often fast-moving traffic away from a live lane.

The A3 Hindhead Tunnel in county Surrey requires regular closures for essential maintenance work. During 2019 there were 14 vehicle incursions into these roadworks putting the lives of workers at risk.

The trial on the north and southbound carriageways of the tunnel is being set up with cooperation between National Highways and its maintenance contractors Kier and Highway Care. The gates clearly and safely filter traffic out of the traffic lane. Cones can then be put out beyond the taper to clearly mark out the closed-off lane. As well as avoiding the need for workers to manually set out tapers, the arms are a strong visual deterrent which will help avoid incursions, particularly at night-time.
 
The announcement regarding SwiftGate follows successful trials of an automated cone laying machine by National Highways, Highway Care and Kier. The Falcon ACLM vehicle puts out and retrieves cones, avoiding the need for a two-man team to lift and drop cones from the back of a moving vehicle. A second automated cone laying machine being developed by King Highway Products through the National Highways’ innovation fund is due to undergo further off-road testing shortly.

National Highways - the wholly government-owned company responsible for modernising, maintaining and operating England’s motorways and major A roads - has a ring-fenced Innovation and Modernisation Fund to help maximise the opportunities offered by technologies such as automated vehicles. It is part of National Highways’ Digital Roads 2025 vision which the agency said will fundamentally change how England’s roads are designed, built, operated and used.

For more information on companies in this article

Related Content

  • Safety barriers offer positive workzone protection
    February 10, 2012
    A road project in Utah has benefited from the use of effective barrier protection during construction. *Paul Grant reports An upgraded section of road from 3500 South in West Valley City, Utah, is now open to traffic. The link was completely rebuilt by Utah DoT (UDOT) from the Bangerter Highway to 2700 West, and the road carries traffic from West Valley toward downtown Salt Lake City and the University of Utah. The work added two centre lanes, which are now the first dedicated Bus Rapid Transit lanes in Uta
  • Lindsay Transport’s Road Zipper at Hirschstetten and Stadlau Tunnels
    July 5, 2016
    Lindsay Transportation Solutions recently used the Intertraffic exhibition in Amsterdam to highlight a major deployment of its Road Zipper System in Austria Work is underway in Vienna to rehabilitate two ageing tunnels and the asphalt highway sections that connect them – a major route into and out of the Austrian capital Vienna. Tunnels, like bridges, offer additional challenges for road works. Typically, there is very little additional space and a work zone must be created from active traffic lanes. The
  • A-one+ gets to gripes with The Blade
    November 7, 2017
    UK contractor A-one+ maintenance operatives in England’s southern counties of Kent, Sussex and Surrey are now protected by a new vehicle-fitted crash cushion. The Blade - manufactured by Dutch company Verdegro Blade - is designed to absorb impacts including those by large heavy vehicles that have increased bumper heights. A-one+ said that the Blade is the only crash cushion that has been tested to US MASH crash testing standards, the most demanding in the world. The cushion, when deployed on a vehicle,
  • A-one+ gets to gripes with The Blade
    November 7, 2017
    UK contractor A-one+ maintenance operatives in England’s southern counties of Kent, Sussex and Surrey are now protected by a new vehicle-fitted crash cushion. The Blade - manufactured by Dutch company Verdegro Blade - is designed to absorb impacts including those by large heavy vehicles that have increased bumper heights. A-one+ said that the Blade is the only crash cushion that has been tested to US MASH crash testing standards, the most demanding in the world. The cushion, when deployed on a vehicle,