Danish date for ViaTherm LongDot

Geveko Markings says that better visibility, reduction of noise and increased road safety are the benefits its new ViaTherm LongDot road marking. ViaTherm LongDot has been developed in collaboration with Vejdirektoratet - the Danish Road Directorate – and several of its partners within the highways sector, says Geveko. Road markings everywhere are based mainly on two types of markings. The ordinary flat road marking (Type I) and the structured profiled marking (Type II). Flat markings are noiseless
May 22, 2019 Read time: 3 mins
Better visibility with Geveko’s ViaTherm LongDot profiled road marking
Geveko Markings says that better visibility, reduction of noise and increased road safety are the benefits its new ViaTherm LongDot road marking.


ViaTherm LongDot has been developed in collaboration with Vejdirektoratet - the 2284 Danish Road Directorate – and several of its partners within the highways sector, says 2447 Geveko.

Road markings everywhere are based mainly on two types of markings. The ordinary flat road marking (Type I) and the structured profiled marking (Type II).

Flat markings are noiseless when vehicles pass over them but can be difficult to see in poor weather conditions and also when dark.

Structured profiled road markings, on the other hand, are much easier to see and reflect light from vehicles better than the ordinary markings because they drain surface water away from the marking. Unfortunately, they create noise when a vehicles passes over them. This means that they are unsuitable for anything else other than edge lines. Because these structured profiled markings give off an audible rumble noise and noticeable vibration when driven over, they provide an efficient warning to the driver that they are crossing the edge lines.

Geveko says that its newly developed ViaTherm LongDot road marking system combines the best attributes and performance of the two types of markings. ViaTherm LongDot could, according to the company, be used for all kinds of road markings. Its profile is designed to keep vibration and noise to an absolute minimum inside a vehicle.

During development, ViaTherm LongDot was tested at Denmark’s Aarhus Airport and on the Danish Road Authority official test deck as well as several temporary locations around the country.

In addition, a research report has analysed motorist’s response and so-called preview time using the ViaTherm LongDot compared to the normal standard markings. Normally, the lower limit for preview time is two seconds. But in dark and wet conditions, preview time for normal road markings is less than two seconds. Geveko explains that the research showed that by using the new road marking profile, preview time was improved by up to 50%, making driving more comfortable and safe.

Due to limited visibility of conventional flat road marking, drivers tend to stay close to the edge lines and not use the full width of the lane, a safer option.  They may also slow down noticeably or brake suddenly when visibility becomes too poor. The performance of ViaTherm LongDot will enhance motorists’ orientation and reduce the likelihood of road accidents, says Geveko.

The combination of better visibility in wet conditions and lower noise makes the ViaTherm LongDot suitable for use in both cities and on smaller roads where structured and profiled road markings have not been used or allowed within 150m of buildings. Instead, a lot of conventional flat road markings have been used, even though there is a strong need for better visibility with the highway being so close to objects on the side of the road.

Road Markings, Barriers & Workzone Protection

For more information on companies in this article

Related Content

  • Safer highway containment continues to grow
    March 8, 2012
    A steady flow of new technology and systems is ensuring the highway barrier sector is seeing major gains in safety. Mike Woof reports A combination of technological development and tougher regulations are ensuring a constant flow of new safety barrier solutions for the highway sector. Issues such as containment and deflection are high on the technical agenda, while a wide array of technologies is being developed to meet specific needs for certain applications. Both in the US and Europe, an increased focus o
    Read More
  • Five roads of the future – cutting transport costs
    June 10, 2019
    Advances in road design and construction will deliver cost savings In the past 50 years there have been huge advancements in the automobile industry but the roads we drive on remain nearly unchanged. As cars get smarter so too should the infrastructure that supports them. Our planet is covered in roads. And by 2050 our global network of highways is projected to increase by 60%. Volvo Construction Equipment takes a look at possible technologies for the roads of the future, looking at some innovations
    Read More
  • Vital structures
    February 10, 2012
    A wide variety of products are available to help bridge owners reduce the need for costly repairs. Bridges are one of the most expensive structures on a highway system, and their maintenance, and where necessary, repair will save millions over time. Prevention being better than cure means that anything that can be done to reduce the need for repair is a good investment. For example, a MOOG bucket-type inspection unit has been commissioned for the Naini Bridge in Allahabad in the state of Uttar Pradesh, Indi
    Read More
  • It’s a blast! Road Dryer RD-1200XT
    November 28, 2018
    Traditional pavement drying typically involves the use of jet engine dryers, infrared heat and portable blowers, combined with brooms and manual squeegees. Each method has its limitations along with safety concerns. These include the use of jet fuel, noise, melting pavement, danger from thrown rocks or other objects – not mention slow results. Because of this, traffic is often fully restricted from traveling on roads or runways where drying work is taking place.
    Read More

Highlighted Content