Skip to main content

ACO’s Qmax Neo drainage for Costa Rica

Stormwater drainage by ACO is keeping dry some access roads for National Route 1, the Carretera Interamericana Norte (North Interamerican Road).
June 16, 2021 Read time: 2 mins
Effective drainage can be achieved using preformed sections that are set in concrete: all images courtesy of © ACO

The route is important and is the northern segment of the Pan-American Highway, which crosses Costa Rica and connects the Central American nations. The route runs through the casco central districts of capital San Jose, linking the city centre with San Jose International, Airport Tobias Bolanos.

In all 2,900m of the ACO Qmax Neo product have been installed on 10 access roads. The ACO Qmax Neo product has been installed on the inside curve to prevent flooding and vehicles aquaplaning during the seasonal four month period of heavy rainfall. The opposite road section drains into an open pitch. The F900 grating was chosen because the design meets the required intake area and the design can be integrated into road surface.

Contractor Pedregal Constructora installed the new Qmax 300 Neo products using concrete to form the structural support around the pre-formed units. The pavement beam feature allowed the positioning of reinforcement and also assisted the flow of concrete through the top part of the product during installation. This job was made easier through the use of an installation jig, which held the product in place.

The sections are placed in excavations, with concrete then being poured around
The sections are placed in excavations, with concrete then being poured around

The ACO DRAIN Qmax Neo is a new member of the ACO Qmax family which now includes the range of sizes of 150mm, 225mm, 300mm, 350mm up to the egg-shaped 550mm, 700mm and 900mm units. The larger sizes offer a substantial retetention volume and collected rainwater can be stored temporarily and then discharged into the sewers system in a controlled manner during heavy rainfall events.

Intergrated gaskets make the channel watertight in accordance with EN 1433. All sizes can be used with tailormade inlet shafts and inspection elements to suit the requirements of the project. For road sections without a camber, this can be delivered using special height adapters to achieve a slope within each channel section.

For more information please email [email protected]

Sponsored content produced in association with ACO Surface Water Management

For more information on companies in this article

Related Content

  • Improving road drainage in Iowa
    August 17, 2015
    In Iowa, the Simex CT 2.8 vibrating compactor wheel is playing an important role in building a subsurface, road drainage system The topsoil of Iowa is famous for its fertility, a characteristic that explains the high agricultural productivity of this state located in the American Midwest. However, the composition of the soil lends itself poorly to the dispersal of rainwater, as its fine granulometry and low level of permeability (12.7cm/hour according to the American Association of State Highway and Tran
  • The MBT-1 from Mobile Barriers now protecting workers in the UK
    August 14, 2019
    Two giant US-made 21m-long mobile barriers are now keeping highway maintenance workers safe in England.
  • Costa Rica road construction plan
    June 3, 2019
    Costa Rica’s Ministry of Public Works and Transports (MOPT) is planning 110 road improvement projects, with a total cost of US$144 million. Construction will start on the first 14 of these in July 2019, with the work being carried out by the contractor MECO. Funding for the work is being provided by the Inter-American Development Bank (IADB) in the shape of a loan. The tender processes for a further 10 projects are commencing, with tenders for an additional 18 projects due to commence in July 2019.
  • A double portion of power and precision – New DYNAPAC F1250CS Plus Compact Paver & RC360 Remote
    July 1, 2023
    Paving in urban areas comes with its own set of challenges and demands on machinery: tight spaces, weight limits, underground pipes, and old, exposed materials such as cobblestones require well-thought-out and innovative solutions. The popular Compact Paver F1250CS is now launched as a new model with a number of improvements as the Dynapac F1250CS Plus. The modifications to the previous model are aimed at even higher protection and comfort of the operator.