Skip to main content

VIDEO: Switzerland’s Astra Bridge concept to be tendered

Switzerland will soon tender for companies to build and supply a mobile system for physically shifting traffic away from road crews – the Astra Bridge concept. The federal highways agency - FEDRO - will be asking general contractors to submit bids starting this summer for the Astra Bridge system, according to the agency. The system, to be used on motorways, includes ramp sections at each end of what amounts to a train of elevated connected road sections. Vehicles run onto the top of the train which is
May 23, 2019 Read time: 3 mins

Switzerland will soon tender for companies to build and supply a mobile system for physically shifting traffic away from road crews – the Astra Bridge concept.

The federal highways agency - FEDRO - will be asking general contractors to submit bids starting this summer for the Astra Bridge system, according to the agency.

The system, to be used on motorways, includes ramp sections at each end of what amounts to a train of elevated connected road sections. Vehicles run onto the top of the train which is positioned directly above where road crews are working. The effect is to create a “bridge” along the length of the lane below upon which paving or maintenance is underway.

The call for tenders will encompass the following services: engineering, production, surveying and control concept, assembly and dismantling concept and finally the operating concept.
 
In order to repair and maintain the heavily frequented motorways in metropolitan regions, work has to be carried out at night to an ever-increasing extent. The required closures of traffic lanes increasingly give rise to congestion, even during the night. To prevent this, intervention times are periodically revised and frequently must be reduced to the detriment of roadwork projects.

The time slots for the implementation of roadworks permit only short construction phases and are also a risk factor in terms of quality and worker safety. In addition, the installation and removal of the temporary safety barriers that are required for night-time work costs valuable time and money, notes FEDRO.

FEDRO said it has carried out a feasibility study concerning a specially designed mobile ramp that accommodates two lanes of traffic.

A roadwork site with a width of 5.2m and a length of 100m can be set up beneath the ramp which can be raised hydraulically. The ramp can also be moved both longitudinally and laterally.

Moving the ramp system over a distance of 100m should take between 10-20 minutes, says the agency. It must be possible to assemble the drive-on and drive-off sections in the course of one night. The remainder of the ramp can be extended during a second night to a length of 238m.

To avoid indentations in the road surface, the loads can be borne by large insulated base plates.

FEDRO says it wants the system to be operational by 2022.

The e-mail address for companies interested in submitting a bid is: %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-email [email protected] false mailto:[email protected] true false%>

Astra’s vital statistics

Number of traffic lanes: 2
Length: 238m, but extendable using modular sections
Width: 7.3m
Maximum incline (drive-on/drive-off sections): 6.1%
Clearance in travel direction: 5.2m x 3.1m
Lateral clearance: 2.2m x 3.1m
Weight: around 1,200tonnes
Moving speed: around 0.5kph


Related Content

  • VIDEO: Kangaroo takes out cyclist down under
    July 25, 2016
    It caught all the cyclists by surprise when a young bounding kangaroo decided to hurl itself at the peloton during a bicycle race in Australia. A fellow racer trailing behind took the video. The targeted cyclist was severely bruised from hitting the deck and he needed stitches. But the marauding kangaroo apparently died from its injuries when it slammed into the bike at a right angle. Cyclists being taken out by kangaroos is more common than most non-Australians would think. Click here to see one cycl
  • Deutz working on hybrid projects for excavators and loaders
    January 6, 2017
    Deutz used bauma to show two hybrid projects it is currently working on, including a hybrid drive for excavators and an innovative start/stop system for compact wheeled loaders. The hybrid drive is based on using a 160kW Deutz TCD 6.1 L6 engine with an integrated motor-generator. The engine is linked to an on-board electrical power network that uses super capacitors, a power inverter and an electric slew motor, allowing components to harvest, store and use electrical energy, specifically for slewing functio
  • Deutz working on hybrid projects for excavators and loaders
    April 16, 2013
    Deutz used bauma to show two hybrid projects it is currently working on, including a hybrid drive for excavators and an innovative start/stop system for compact wheeled loaders. The hybrid drive is based on using a 160kW Deutz TCD 6.1 L6 engine with an integrated motor-generator. The engine is linked to an on-board electrical power network that uses super capacitors, a power inverter and an electric slew motor, allowing components to harvest, store and use electrical energy, specifically for slewing functio
  • Chinese inventor puts together vacuum cleaner-size petrol car
    December 15, 2014
    Traffic congestion and the cost of running a car have been pushing Chinese car manufacturers to think small, especially for electric vehicles. Electric scooter and motorcycle have long been popular and in the past several years more and more small electric cars are appearing on crowded urban roads One popular three-wheel electric vehicle has a large retractable bubble top, making it look like a futuristic car from a low-budget 1950s Hollywood movie. It may have a top speed of only 30kph, as the BBC report