Texas certification of RetroTek-MU operator a first

Striping Service and Supply is the first US contractor certified by the Texas Department of Transportation to operate the RetroTek-MU road striping Retroreflectometer. The Texas A&M Transportation Institute stringent certification programme provides a quantitative basis for evaluating the ability of a contractor to operate the RetroTek-MU retroreflectometer. The vehicle-mounted RetroTek-MU - manufactured by Reflective Measurement Systems, based in Dublin, Ireland - measures the retroreflectivity of lo
July 27, 2018 Read time: 3 mins
RetroTek-MU road striping Retroreflectometer: independently certified to ASTM E 1710 and CEN EN 1436.
Striping Service and Supply is the first US contractor certified by the Texas Department of Transportation to operate the RetroTek-MU road striping Retroreflectometer.


The Texas A&M Transportation Institute stringent certification programme provides a quantitative basis for evaluating the ability of a contractor to operate the RetroTek-MU retroreflectometer.

The vehicle-mounted RetroTek-MU - manufactured by 8451 Reflective Measurement Systems, based in Dublin, Ireland - measures the retroreflectivity of long-line pavement markings.

The programme was developed and administered by the institute through an implementation project sponsored by the Texas DoT and the 2410 Federal Highway Administration (FHWA). Certification by the institute consists of taking  numerous pavement markings measurements of various colours, patterns, and retroreflectivity levels and providing the measurement results to the Texas DoT for assessment.

Jay Green, a veteran retroreflectometer operator with Striping Service and Supply, is the first survey operator and user to be certified using the RetroTek-MU. Certification makes Striping Service and Supply eligible for Texas state pavement markings retroreflectivity contracts.

RetroTek-MU measures the striping on both sides of the lane in one pass without the need to switch the sensor from one side of the vehicle to the other.  “At the end of surveying, all data can be quickly prepared and sent to district Texas DoT officials without the need for hours of post-processing,” said Green.

The RetroTek-MU is unlike traditional side-mounted retroreflectometers in that it is centre-mounted on the front of a vehicle. This eliminates the need to drive closely to the striping at the edge of the lane. This makes it safe for the operator and other road users because it doesn’t protrude from the side of the vehicle./

Importantly, it also is not subject to dirt ingress from the vehicle’s front wheels.
 
The RetroTek-MU sensor is mounted higher than the side-mounted systems as it surveys at 15mts distance (conforming to 30m geometry). It is also less likely to get damaged with impact from speed ramps and other road furniture.

The sensor need not be switched from one side of the vehicle to the other to survey different lines, for example edge and centre markings, because the RetroTek-MU surveys across the full width of a lane in one pass. This eliminates a lot of survey downtime and reduces man hours, survey time and travel distances by up to half, according to the manufacturer.

Outputs from a survey by the RetroTek-MU are available to export to Excel (.csv) and Google Earth (.kml) formats for further processing or viewing. Recorded video images are saved for subsequent replay and visual analysis.

Once the system is calibrated, retroreflectivity measurements are reliable with accuracy and repeatability similar to established hand held retroreflectometers, according to the manufacturer. The operator may customise the averaging distances for retroreflective measurements and set the retroreflective result threshold levels.

It is easy to fit, calibrate, operate and remove, with a comprehensive suite of mapping and video software for post survey analysis. It is independently certified to ASTM E 1710 and CEN EN 1436.

“With the advent of advanced driver assist Systems, this technology will assist road agencies and infrastructure stakeholders to assess and manage the pavement markings of their entire road network safely and quickly,” said Joe Turley, chief executive of Reflective Measurement Systems.

Striping Service and Supply, based in Grand Prairie, Texas, with branches in Louisiana and Florida states, offers a full line of pavement marking supplies and equipment for contractors. These include paints, thermoplastic, preform markings, custom and standard signs, and all striping supplies and road striping retroreflectivity assessment readings.

Road Markings, Barriers & Workzone Protection

For more information on companies in this article

Related Content

  • Smaller contractors wanted for Melbourne’s North East Link project
    September 27, 2018
    Australia’s Victoria state government has moved to ensure smaller contractors get a share of the US$12 billion worth of Melbourne city’s North East Link contracts. According to a report in the Australian Financial Review, Victoria state treasurer Tim Pallas said that consortiums bidding for North East Link could not include more than one of the top three local contractors. This is to encourage more international companies and smaller Australian contractors to tender for the proposed 26km project.
    Read More
  • Attitude is key to sustainability, says Volvo CE’s Thomas Bitter
    June 27, 2018
    Whether you are in the global Volvo Ocean Race or working on-site locally, sustainability is about attitude as much as technology. David Arminas reports. Technology, sustainability and safety. We ignore these often related themes at our peril. This was the key point made by Volvo Group chief executive Martin Lundstedt during his brief opening presentation at the start of the Building Tomorrow Conference in Spain last October. The conference took place within the harbour of Alicante that was bustling wit
    Read More
  • Atkins wins Texas Department of Transportation contract
    June 18, 2018
    Atkins, a member of the SNC-Lavalin Group, has been awarded a statewide procurement engineering contract from the Texas Department of Transportation (TxDOT). The deal will see Atkins assisting TxDOT with alternative delivery procurement needs throughout the state. “Our role is to review and analyse the approaches outlined in submittals from design-builders or others to ensure they can commit to and meet TxDOT’s alternative delivery expectations,” said Wes Burford, senior project director in SNC-Lavalin’s
    Read More
  • Innovation in road design and management software
    February 17, 2012
    The emphasis on data processing and re-use, continues to grow in the development of design and management software. The interoperability of software, the need to handle and process larger amounts of data, and re-use and retention of data sets from one task to another have been a growing emphasis in the past few years. It allows infrastructure companies to get better value from expensively collected information and to focus more on the whole life cycle of projects.
    Read More

Highlighted Content