Texas certification of RetroTek-MU operator a first

Striping Service and Supply is the first US contractor certified by the Texas Department of Transportation to operate the RetroTek-MU road striping Retroreflectometer. The Texas A&M Transportation Institute stringent certification programme provides a quantitative basis for evaluating the ability of a contractor to operate the RetroTek-MU retroreflectometer. The vehicle-mounted RetroTek-MU - manufactured by Reflective Measurement Systems, based in Dublin, Ireland - measures the retroreflectivity of lo
July 27, 2018 Read time: 3 mins
RetroTek-MU road striping Retroreflectometer: independently certified to ASTM E 1710 and CEN EN 1436.
Striping Service and Supply is the first US contractor certified by the Texas Department of Transportation to operate the RetroTek-MU road striping Retroreflectometer.


The Texas A&M Transportation Institute stringent certification programme provides a quantitative basis for evaluating the ability of a contractor to operate the RetroTek-MU retroreflectometer.

The vehicle-mounted RetroTek-MU - manufactured by 8451 Reflective Measurement Systems, based in Dublin, Ireland - measures the retroreflectivity of long-line pavement markings.

The programme was developed and administered by the institute through an implementation project sponsored by the Texas DoT and the 2410 Federal Highway Administration (FHWA). Certification by the institute consists of taking  numerous pavement markings measurements of various colours, patterns, and retroreflectivity levels and providing the measurement results to the Texas DoT for assessment.

Jay Green, a veteran retroreflectometer operator with Striping Service and Supply, is the first survey operator and user to be certified using the RetroTek-MU. Certification makes Striping Service and Supply eligible for Texas state pavement markings retroreflectivity contracts.

RetroTek-MU measures the striping on both sides of the lane in one pass without the need to switch the sensor from one side of the vehicle to the other.  “At the end of surveying, all data can be quickly prepared and sent to district Texas DoT officials without the need for hours of post-processing,” said Green.

The RetroTek-MU is unlike traditional side-mounted retroreflectometers in that it is centre-mounted on the front of a vehicle. This eliminates the need to drive closely to the striping at the edge of the lane. This makes it safe for the operator and other road users because it doesn’t protrude from the side of the vehicle./

Importantly, it also is not subject to dirt ingress from the vehicle’s front wheels.
 
The RetroTek-MU sensor is mounted higher than the side-mounted systems as it surveys at 15mts distance (conforming to 30m geometry). It is also less likely to get damaged with impact from speed ramps and other road furniture.

The sensor need not be switched from one side of the vehicle to the other to survey different lines, for example edge and centre markings, because the RetroTek-MU surveys across the full width of a lane in one pass. This eliminates a lot of survey downtime and reduces man hours, survey time and travel distances by up to half, according to the manufacturer.

Outputs from a survey by the RetroTek-MU are available to export to Excel (.csv) and Google Earth (.kml) formats for further processing or viewing. Recorded video images are saved for subsequent replay and visual analysis.

Once the system is calibrated, retroreflectivity measurements are reliable with accuracy and repeatability similar to established hand held retroreflectometers, according to the manufacturer. The operator may customise the averaging distances for retroreflective measurements and set the retroreflective result threshold levels.

It is easy to fit, calibrate, operate and remove, with a comprehensive suite of mapping and video software for post survey analysis. It is independently certified to ASTM E 1710 and CEN EN 1436.

“With the advent of advanced driver assist Systems, this technology will assist road agencies and infrastructure stakeholders to assess and manage the pavement markings of their entire road network safely and quickly,” said Joe Turley, chief executive of Reflective Measurement Systems.

Striping Service and Supply, based in Grand Prairie, Texas, with branches in Louisiana and Florida states, offers a full line of pavement marking supplies and equipment for contractors. These include paints, thermoplastic, preform markings, custom and standard signs, and all striping supplies and road striping retroreflectivity assessment readings.

Road Markings, Barriers & Workzone Protection

For more information on companies in this article

Related Content

  • New radio wave technology assesses asphalt integrity
    March 14, 2017
    Real time information on asphalt density and uniformity can boost construction quality - *Roger Roberts, GSSI. Properly compacted asphalt is a major factor in the lifespan of a road, as inadequately compacted asphalt deteriorates at a more rapid rate than properly compacted material. With the billions spent on road construction and repairs each year, it has become a matter of urgency to find new technologies that can ensure the integrity of asphalt on newly paved roads. New radio wave technology is now avai
    Read More
  • Speed limiters will limit fatalities, says the TRL
    July 29, 2019
    The soon-to-be mandatory speed limiters on vehicles in the European Union will make all safety other features more efficient, according the UK-based Transport Research Laboratory. In March the European Parliament passed a law that safety features such as intelligent speed assistance and advanced emergency-braking system must be installed in new vehicles from May 2022. They form part of the EU’s new suite of safety measures. TRL, which provided input for the European Commission regarding the formulatio
    Read More
  • Crushing and screening advances introduced
    June 10, 2019
    New developments in crushing and screening equipment as well as washing technology will deliver benefits for materials production - Mike Woof writes Competition is tough in the market for quarry material processing equipment, with key firms introducing new systems that are said to boost capacity and performance. Firms offering crushing and screening equipment have expanded their respective ranges, offering additional capabilities for these segments. Mobility and versatility have been key factors in the d
    Read More
  • Securing safer transportation infrastructure through non-destructive technology
    June 16, 2014
    Kevin Vine reports on the use of non-destructive testing for structural analysis of bridges Seven years ago, the overpass collapse in Laval, Québec that led to the death of five people brought to light severe issues with the state of the country’s bridges and transportation infrastructure. More recently, a crack in the Champlain Bridge to Montreal that forced over 160,000 commuters to find alternate routes to work reaffirmed a need for greater emphasis on early detection before a crisis occurs.
    Read More

Highlighted Content