Skip to main content

Italian manufacturer AMS provides safety by using honeycomb panels

Italian road safety firm Industry AMS has developed and patented high efficiency energy absorption systems provided with special metallic honeycomb panels. The SMA Crash Cushion was certified to the European Standard EN1317. It also tested successively against the US standard NCHRP in a frontal impact with a pickup truck provided with an anthropomorphic traffic device - and obtained the best Euro NCAP score.
May 6, 2016 Read time: 3 mins

Italian road safety firm Industry AMS has developed and patented high efficiency energy absorption systems provided with special metallic honeycomb panels.

The SMA Crash Cushion was certified to the European Standard EN1317. It also tested successively against the US standard NCHRP in a frontal impact with a pickup truck provided with an anthropomorphic traffic device - and obtained the best Euro NCAP score.

According to 7403 Industry AMS, the efficiency is guaranteed by high-tenacity steel which permits absorption through plastic deformation of the hexagonal cells of the impacting systems. On the basis of such honeycomb absorbing system, Industry AMS srl has developed a Crash Cushion Family (parallels and wide) certified according to EN1317, for the speed classes of 50, 80, 100 and 110km/h.

The use of a honeycomb absorbing system produces almost uniform absorption of energy during the entire crash cushion deformation. This prevents force peaks and consequent deceleration peaks, which are common in discontinuous energy absorption systems.

The company says that the energy absorption system is so efficient that it has been considered appropriate to prove the compliance of SMA Crash Cushion even with the stricter tests of the American NCHRP standard.

The Crash Cushion SMA 110, already tested and certified according to EN 1317, was subjected to a lateral and frontal test with a 2tonne pickup, according to the impact scenarios and TL TL 3:37 3:31 of NCHRP 350. In the case of frontal impact, the vehicle was equipped with crush test instrumented dummy able to calculate the biomechanical parameters related to the head, neck and chest and establish the damage and/or injury which would affect the vehicle occupants.

The use of a crush test instrumented dummy is then a direct method for the determination of injury to the occupants of the vehicle.

The ultimate goal of a road safety device is, in fact, to ensure safety of the occupants in case of impact and by using an instrumented dummy we quantitatively verified how the SMA Crash Cushion responds to this purpose.

In fact, the parameters that determine the performance of an impact Crash Cushion according to the 1317 standard, NCHRP and MASH are parameters of the vehicle and literature data show that these are not always related to the injuries to the vehicle occupants.

Ultimately, the SMA 110 Crash Cushion successfully underwent two additional shocks performed according to NCHRP 350. The company says that makes it almost completely compliant with the two main reference standards.

For more information on companies in this article

Related Content

  • Time to position H4b as standard central reservation restraint systems
    March 22, 2017
    Safety restraints have come a long way in the past 20 years. But perfection has its drawbacks, notes Thomas Edl, head of barrier manufacturer Delta Bloc. In Europe, establishing regulations for construction and testing of road restraints has been complex. But the journey has been worthwhile in terms of lives saved, says Thomas Edl, managing director of Delta Bloc International, based in Vienna. The European Commission looked at this and decided that there should be regulations to make it an even playing fie
  • How retroreflection can assist in improving traffic safety
    April 29, 2015
    Better road markings can boost safety for road users. There is currently a strong focus on traffic safety in Europe with a number of programmes intended to reduce the overall number of crashes on roads and cut the statistics for injuries and fatalities. In the first EU programme implemented between 2001 and 2010, the goal was to halve the number of people killed in road crashes. Most EU countries showed significant improvement over the decade and a few countries met or even exceeded this target of 50% r
  • US road safety record
    April 26, 2012
    The latest official statistics from the US on road accidents show that fatality levels on the nation's roads have dropped to the lowest figures seen for more than six decades. The information was released by US Transportation Secretary Ray LaHood, revealing that highway deaths fell to 32,885 for 2010, the lowest level since 1949.
  • Highway Care International expands its presence in Australia
    May 10, 2016
    Highway Care International, a UK provider of road safety products, has launched Highway Care Australia, based in Sydney. "Highway Care has had a positive presence in Australia since 2006, when BarrierGuard 800 was first introduced,” said international sales director Ben Duncker. “We expanded the team last year to include local sales and technical support and we appointed a product manager, Wayne Duckworth, a specialist in work zone safety products and an experienced point of contact for the region."