Skip to main content

Improving safety barriers for motorcyclists

Delays to better barrier safety pose further risks for Europe's powered two wheeled riders. The issue of safety for powered two wheeler riders (PTWRs) is a matter of some debate in Europe. Although Europe's PTWRs make up a mere fraction of the vehicle population, they figure highly in accident statistics. Safety provisions could be improved using available technology but a recent political decision has downgraded the importance of such a move.
February 20, 2012 Read time: 3 mins
There are numerous products on the market designed to reduce the risk of motorcyclists impacting with barrier supports

Delays to better barrier safety pose further risks for Europe's powered two wheeled riders

The issue of safety for powered two wheeler riders (PTWRs) is a matter of some debate in Europe. Although Europe's PTWRs make up a mere fraction of the vehicle population, they figure highly in accident statistics. Safety provisions could be improved using available technology but a recent political decision has downgraded the importance of such a move.

The 2844 Comité Européen de Normalisation (CEN) is the international body that makes standards for products in the European Union. CEN has safety amongst its remit, yet has turned a ready-to-be-voted guardrail standard into a technical paper, the use of which will be left to the discretion of each member state. And according to the 2845 Federation of European Motorcyclists' Associations (FEMA), in doing so CEN has missed a major opportunity to save motorcyclists' lives.

CEN's technical committee on road equipment held an annual meeting where the draft standard for motorcyclist protection systems was turned into a Technical Specification. Representatives from the Czech Republic, Finland, Germany, Ireland, the Netherlands, Sweden and the United Kingdom, all voted to downgrade the draft standard. The issue is of note as it means many existing containment barriers, although designed to protect motorists, will continue to pose a threat to motorcycle riders.

Many barrier types in widespread use across Europe have been criticised by motorcycling groups such as FEMA. These barriers pose impact hazards for motorcyclists with the support posts in particular known to cause serious injury and death to fallen motorcyclists.

FEMA has been one of the organisations campaigning hard for the last three years for a change in the European safety regulations, which would require the support posts of barriers to be covered, particularly at known danger spots. FEMA's General Secretary, Aline Delhaye said, "What will be done with this Technical Specification is a mystery to me." The decision was made despite the proven safety benefits of the Spanish Standard on which EN1317-8 draft was based. Since Spain introduced its regulations for approved and protected guardrails and these units were installed, there have been no fatal or serious injury accidents resulting from fallen riders impacting against barrier supports.

In spite of this evidence, only Belgium, France, Italy, Norway, Portugal and Spain supported the proposal for a European Standard. FEMA says that it will continue working to improve safety for motorcyclists, in the face of political inactivity. FEMA also questions why member nations did not support the draft standard.

The financial cost of introducing safety measures would be comparatively small, as has been shown in Spain. This would be hugely outweighed by the savings in the human scale, as well as economically, by reducing the injury and fatality toll amongst motorcycle riders.

There are numerous proven products designed for use on highways to protect fallen motorcyclists from striking supporting posts on barriers and come from an array of suppliers. Products already in use in Spain and other European countries include those supplied by firms such as 2846 Basyc, 2847 Congost, 2848 Fracasso, 1529 Highway Care, 238 Industrias Duero, 272 Marcegaglia, 1263 Motoprotec, 333 Snoline and SCT.

Related Content

  • REBLOC barriers for Antwerp’s Oosterweel Link
    October 31, 2022
    Effective noise protection is an essential part of road infrastructure- both temporarily during construction and permanently along the finished road.
  • Addressing road safety issues worldwide
    February 27, 2012
    Actions are planned on road safety but are they enough? - *Charles Melhuish and *Alan Ross report. Deaths and injuries on the world's roads are now a major health concern. Road crashes now cause around 1.3 million deaths and injure or disable as many as 50 million persons globally each year. The vast majority of these deaths and injuries (over 90%) occur in low- and medium- income countries adding to their already overburdened health facilities as well as adversely affecting economic and social development
  • Success of toll road operators' conference
    July 12, 2012
    The 37th ASECAP Annual Study and Information Days held in Krakow, Poland, gathered some 300 road transport CEOs, experts and government decision-makers making the event "a huge success." Patrick Smith reports Toll road operators from across Europe have met to discuss the state of their businesses in the current economic climate and how to tackle it. Fabrizio Palenzona, the outgoing President of ASECAP (the European professional Association of Operators of Toll Road Infrastructures) and president of AISCAT (
  • Modular crash cushions available
    June 28, 2013
    Italian specialist INDUSTRY AMS has developed a range of modular redirective crash cushions. The firm’s Safety Modular Absorber (SMA) models are available in different specifications to suit varying applications. The company claims that its novel SMA crash cushions are the most compact absorbers available on the market and these units meet the European safety requirements of the EN 1317-3 standard.