Energy absorbing safety barrier

Barrier Systems says that its new tensioned barrier offers high energy absorbing capabilities in head-on collisions. The company says that this is because the X-Tension technology is a tension-based solution rather than compression-based. The new range delivers good performance in these applications, as energy is absorbed with resistance at the impact head rather than being transferred down the rail as occurs with other systems. Even high-angle (15° during testing) impacts on the nose resulted in the vehicl
March 9, 2012 Read time: 3 mins

165 Barrier Systems says that its new tensioned barrier offers high energy absorbing capabilities in head-on collisions.

The company says that this is because the X-Tension technology is a tension-based solution rather than compression-based. The new range delivers good performance in these applications, as energy is absorbed with resistance at the impact head rather than being transferred down the rail as occurs with other systems. Even high-angle (15° during testing) impacts on the nose resulted in the vehicle being redirected and controlled rather than passing to the backside of the terminal at high speed. For side impacts, tension in the rail is transferred by cables to the foundation anchor to provide containment and redirection.

The company also has an ABSORB 350 product that is non-redirective and is designed as a gating crash cushion. The system offers a reliable and easy method of protecting the ends of concrete barriers and can be attached to the end of permanent or portable concrete barriers, without the need to anchor the system to the roadway surface.

At 610mm wide, it is suited for narrow areas where road and workspace is limited. ABSORB 350 is easy to install and is easier to restore after an impact than other non-redirective, gating crash cushions. Tests show the product meets the rigorous requirements of NCHRP Report 350, Test Levels 2 (70 km/h) and 3 (100 km/h). This system is designed for use on narrow hazards for exits, wide medians, edge of road locations and locations.

Meanwhile the BarrierGuard 800 is a rapidly deployable Steel Safety Barrier for use in work zones or as a permanent installation. The system offers extremely attractive costs compared to portable concrete barrier since 180m can be delivered to a job site in one truck load. The system is also quick to assemble on site due to its connection system which uses only one bolt, allowing a crew of three to install up to 300m/hour. Featuring a step profile the barrier can redirect errant vehicles while causing little damage to either alnd also meets the tough NCHRP Report 350, Test Level 4.

Lastly, the firm's PaveGuard system offers continuous positive barrier protection during paving operations for workers, motorists and equipment. The system is on wheels and is pulled as the project advances and can be attached to a vehicle when it has to be moved. The system can be loaded and unloaded without the need for special equipment and does not require electrical power or sophisticated control systems.
Road Markings, Barriers & Workzone Protection

For more information on companies in this article

Related Content

  • Tunnels - an environmentally attractive option?
    February 21, 2012
    While tunnels are often more expensive than bridges, they can offer environmentally attractive options for transport schemes. Tunnels offer environmentally attractive options for a range of transport infrastructure schemes, but in many cases high construction costs may restrict their use.
    Read More
  • On the road to energy efficiency and emissions reduction with IRF
    November 15, 2019
    Global commitments to reduce carbon emissions and simultaneously increase the resilience of critical infrastructure to extreme weather events have placed greater societal expectations on road builders to design and deliver sustainable pavements that are both affordable and scalable.
    Read More
  • Advancing asphalt plant technology
    June 9, 2016
    Advances in asphalt plant technology were in major evidence at the bauma 2016 exhibition in Munich - Mike Woof writes One of the most apparent developments at bauma 2016 was the strong focus on asphalt plant technology. The massive physical presence of the asphalt plants could be seen from a distance, right across the showground, particularly the 50m-high machine Benninghoven had opted to exhibit. However, other plant systems from rival firms Ammann, Lintec and Marini, as well as Turkish company E-MAK, c
    Read More
  • Roadtec machines deliver Alaska runway rebuild
    January 26, 2017
    A challenging airport runway project in Alaska has been carried out with the help of Roadtec construction equipment equipped with Topcon machine control systems. Anchorage-based Knik Construction carried out the work at the airport in Yakutat, located in the southeast corner of Alaska. Bounded by the Gulf of Alaska to the South, mountains to the North, and coastal glaciers to the East and West, Yakutat is remote even for Alaska. There are no roads leading in or out and all commerce and access is by air o
    Read More

Highlighted Content