Skip to main content

Crash test highlights barrier safety

The event, organised by UK Roads, was held in association with MIRA (formerly Motor Industry Research Association); Mott MacDonald and Traffex/Road Expo, also offered an exhibition of related products and services from MIRA; FSP (Frangible Safety Posts); 3A Composites; ASD Metal Services; JPCS; Tofco; FLI Structures (screwpile demonstrations); Highway Care; Gloucester Composites; Traffex; Road Expo; Brett Landscaping; NAL and SAPA.
February 24, 2012 Read time: 3 mins
There was extensive intrusion into the driver’s area after collision with a traditional steel column, while there was minimal intrusion into the driver’s area after collision with a passive column

The event, organised by UK Roads, was held in association with 3158 MIRA (formerly Motor Industry Research Association); 2579 Mott MacDonald and 346 Traffex/Road Expo, also offered an exhibition of related products and services from MIRA; FSP (Frangible Safety Posts); 3A Composites; ASD Metal Services; JPCS; Tofco; FLI Structures (screwpile demonstrations); Highway Care; 3162 Gloucester Composites; Traffex; Road Expo; 3161 Brett Landscaping; NAL and SAPA.

In one demonstration, a Ford Fiesta was crashed sideways at 35km/hour into a traditional unforgiving steel lighting column, mounted in a retention socket supplied and installed by NAL. The column and the socket were unaffected, but according to police officers present the damage inflicted was likely to have resulted in serious head, arm and leg injuries for the driver.

The column was removed from the socket, which was then available to be re-used to support a replacement column.
In another demonstration, a Suzuki Swift was crashed at 100km/hour into two 140mm diameter passively safe composite posts (provided by Frangible Safety Posts/1604 FSP) simultaneously. This was to highlight that despite two of these products being struck at the same time they do not significantly reduce the speed of the vehicle, and therefore do not subject the occupants to unacceptable deceleration forces.

The posts were mounted in Orion sockets provided by Poletech and supported a lighter weight composite sign plate provided by 3159 3A Composites and 3054 ASD metal services.

“The FSP posts performed perfectly, yielding on impact. The Orion sockets were unaffected by the impact which were then available to be re-used for replacement posts,” said an observer.
Another Ford Fiesta was crashed sideways at 35km/hour into a passively safe 15m lighting column provided by SAPA and mounted in a retention socket supplied and installed by NAL.

“Despite the low speed and orientation of the impact, the product still performed perfectly, shearing away as it is designed to do, causing very little damage or intrusion to the side of the car, and significantly less than that caused by the traditional column in demonstration one. It is very unlikely that any serious injury would have been sustained by the driver as a result.”
In the fourth demonstration, a Vauxhall Vectra was crashed at 100km/hour into a TAU crash cushion provided by 1529 Highway Care. “The demonstration was a perfect example of how crash cushions can prevent serious injury and save lives. The car was brought to a controlled halt by the TAU cushion without it experiencing any rotational or overturning forces,” said the observer.

For more information on companies in this article

Related Content

  • Lightweight drain covers reduce risk of theft
    February 15, 2012
    With scrap metal prices soaring, some European countries are suffering from a spate of drain cover thefts.
  • Lightweight drain covers reduce risk of theft
    March 2, 2012
    With scrap metal prices soaring, some European countries are suffering from a spate of drain cover thefts. Serious safety issues arise for road users of all categories as a result of drain cover theft, with utility companies and local councils being left with the additional burden of replacing stolen ductile ironwork. However Ultracrete, part of the Instarmac Group, has a solution in the shape of its recently launched coverTEC range of pedestrian and road composite manhole covers and frames. These lightweig
  • Clever electric solution for embankment stabilisation
    August 28, 2013
    A highly innovative solution for road embankment stabilisation has helped save costs by up to 30% over conventional techniques. Balfour Beatty Mott MacDonald has used electrical current to stabilise embankments on a busy UK dual carriageway, avoiding disruption to motorists, cutting carbon by 40% and costs by 30%, and producing zero waste When slope failure was detected on embankments carrying the popular A21 dual carriageway, Balfour Beatty Mott MacDonald pioneered a novel technique to tackle the prob
  • Report into passively safe lighting columns
    November 17, 2015
    Lighting columns and other roadside structures such as overhead gantries play an essential role in road safety, by improving night time visibility or giving information to drivers. However old generation units themselves pose a potential hazard as they can be impacted by vehicles departing the roadway and potentially with fatal results in the event of a high speed crash. This is why newer passively safe columns have been developed, which are designed to collapse in a controlled fashion when impacted, reduci