Skip to main content

A titan of a barrier gate from SMA

The Titanus barrier gate from SMA Road Safety is ideal for areas characterised by a reduced length opening section.
By David Arminas February 4, 2022 Read time: 2 mins
The Titanus barrier gate from Italian firm SMA Road Safety is light-weight - suitable for use on bridges and viaducts

SMA Road Safety’s new Titanus barrier gate is tested in class H4B to allow for continuity of H4 barriers. Meanwhile, thanks to its W2 working width, SMA says that Titanus is ideal for areas characterised by a reduced length opening section.

The full system length is 40m with pole spacings of 1.5m. As well, the gate is light-weight, making it suitable for installation on bridges and viaducts, all without increasing drastically the loads on the bridge’s decks.

The new Titanus CE certified system is supplied in pre-assembled modules of 6m and is adaptable to different lengths. The gate can be opened in only two minutes and acts as an element of continuity between steel or concrete barriers through a suitable transition element. It is tested for containment level class H4b with an integrated sliding module in accordance with ENV 1317-4:2003.

Installation of the system requires only positioning and anchoring to the ground which takes place by means of internally threaded sleeves on which the pole plate is screwed. The connection of the terminal elements to the traffic barrier is done using adjustable connection pieces in order to correct the distance from the barrier during installation.

Finally, the gate can be swung fully open for the system’s entire length thanks to a series of small convenient dolly wheels on the lower half of the assembly.

“If a barrier gate exceeds 40m in length, it must be tested according to part 2 of EN 1317 as a longitudinal barrier,” explained  Mauro Corsanici, crash analyst with SMA Road Sasfety. “But if it has a shorter length, it is treated as a transition, according to the voluntary norm EN 1317 part 4. For transitions, however, the standard says that interconnections with gaps greater than one class must be avoided, namely an H4b barrier must be connected with an H3 barrier gate and not H2.”

Finding a practical solution is hard but the Titanus fits the bill – and the regulations, he says. The Titanus is manufactured at SMA Road Safety’s factory located in Marcianise, just north of Naples, Italy.

For more information on companies in this article

Related Content

  • Proven safety barrier installation practices
    June 27, 2013
    Barrier selection criteria should pay close attention to risks for stretches of road as well as regulations. Roadways need to have barriers to provide passive protection for users and to reduce the risk of injury or death in the event of a vehicle leaving the roadway. A wide array of regulations and legislation covers the design and installation of barriers on Europe’s roads. However, there are still a number of loopholes for certain types of roadside protection and further agreement is required to close th
  • Eradicating work zone danger
    June 26, 2013
    New safety systems for highway work zones are helping to reduce deaths and injuries in the United States, while much work is being done in Europe to improve work zone safety. Guy Woodford reports. With more road building underway than at any one time in Texas history, the US Lone Star state’s Department of Transportation (TxDOT) is introducing its first highway safety system with queue-warning technology and temporary rumble strips to cut work zone collisions. Debuting along a central Texas stretch of the
  • Barrier system offers containment, noise reduction
    April 5, 2012
    Italian firm Marcegaglia has developed a new range of steel road safety barriers that is said to be versatile and cost effective. The units meet containment levels N2 to H4 and can be specified for different options in terms of working width levels (W). The line-up includes a dedicated system for motorcyclist protection designed to be fitted to all existing guardrails, a new P4 energy absorbing terminal system for barriers and a renewed range of steel New Jersey barriers, with optional integrated noise prot
  • Barrier system offers containment, noise reduction
    May 24, 2012
    Italian firm Marcegaglia has developed a new range of steel road safety barriers that is said to be versatile and cost effective. The units meet containment levels N2 to H4 and can be specified for different options in terms of working width levels (W). The line-up includes a dedicated system for motorcyclist protection designed to be fitted to all existing guardrails, a new P4 energy absorbing terminal system for barriers and a renewed range of steel New Jersey barriers, with optional integrated noise prot