Skip to main content

SDS develops SuDS material to tackle highway metals pollution

SDS says that its engineered treatment media Aqua-Xchange can be used in regulatory-compliant sustainable drainage systems - SuDS. Delivered to site in lightweight 1m³ bags, it can be deployed as stormwater treatment in highways drainage, as well as on other higher risk locations such as retail car parks, freight and logistics hubs. SDS claims that independent tests have shown its Aqua-Xchange removes 99% of dissolved copper and zinc, toxic metals identified by Highways England as priority pollutants
November 30, 2018 Read time: 3 mins
SDS’s Aqua-Xchange is a flexible and granular material that captures copper and zinc in surface water runoff from motorways, trunk roads and other high-traffic areas
SDS says that its engineered treatment media Aqua-Xchange can be used in regulatory-compliant sustainable drainage systems - SuDS.


Delivered to site in lightweight 1m³ bags, it can be deployed as stormwater treatment in highways drainage, as well as on other higher risk locations such as retail car parks, freight and logistics hubs.

SDS claims that independent tests have shown its Aqua-Xchange removes 99% of dissolved copper and zinc, toxic metals identified by 8100 Highways England as priority pollutants and subject to strict regulatory controls.

Aqua-Xchange was also proven to retain these metals even when applications of road salt were simulated.

It works through a combination of naturally-occurring materials that use adsorption and ionic exchange to form unbreakable bonds with the heavy metals. It captures and retains them even in heavy storms.
 
The result is “an affordable and truly versatile new SuDS material that can be used in both existing and new drainage schemes”, according to Jo Bradley, SDS market development manager and who led the development project.

Aqua-XchangeTM has a large active surface area, enabling high-performance pollutant removal in a small space. As a result, it can be used to deliver pre-treatment as part of a vegetative SuDS scheme, enabling smaller SuDS ponds or wetlands to be designed where otherwise there would have been no room for them.

In a typical application, a layer of SDS Aqua-Xchange can be added as an additional component to a linear filter drain and can be installed at a shallow depth which avoids costly excavation and use of heavy cranes.


The SDS Aqua-Xchange can also be combined with other proprietary SuDS devices. As it can filter out finer silts and sediments, it can be deployed downstream of a hydrodynamic vortex separator such as SDS’s Aqua-Swirl that targets larger particles. It can also be combined with geo-cellular storage, such as SDS’s GEOlight, when additional attenuation is needed as part of a  roadside treatment system.

Aqua-Xchange can be included as a component in vegetative SuDS devices such as dry swales, raingardens or bio-remediation zones, so that robust retention of copper and zinc is completely assured while plants can continue to thrive as part of the landscaped design.

The company says that the Aqua-Xchange was tested to reflect a range of rainfall conditions under the observation of an independent representative from a UKAS-accredited laboratory in accordance with the 3518 British Water protocol.

For more information on companies in this article

Related Content

  • Microplastics: a review of the research
    June 4, 2020
    Sweden’s VTI and Chalmers University have catalogued the available literature.
  • Novel drainage solution from REHAU
    July 6, 2016
    A novel drainage solution called the RAUSIKKO high load box system has been developed by REHAU. This system allows rainater to drain away to a separate spot rather into the localised area. The system can be used in applications with space constraints and suits duties in the parking areas and access roads around buildings. The system can be covered over with a road surface and then is strong enough to handle the passage of heavy vehicles. The idea of the system is to prevent flooding close to buildin
  • Construction materials testing
    May 14, 2012
    Malta National Laboratory (MNL) has asked the UK’s TRL to help it establish a construction materials testing facility. This will allow MNL to become an independent test house on the island, and it will then be able to undertake testing of road materials to the required international standards. A team of TRL experts with extensive knowledge of civil engineering materials testing and pavement materials technology and design, as well as large-scale project management skills, will deliver the project in two p
  • Effective washing processes are crucial to provide quality materials
    July 1, 2013
    Effective washing processes are crucial to providing quality materials. Materials washing specialist CDE is offering three updated machines, the Evowash, the M2500 and the Agg Max 83R. All three machines have benefitted from improvements compared to previous versions but the Evowash unit features the most changes, including two ideas with patents pending. “We have been evolving the Evowash ever since we invented it 20 years ago, hence its name,” said Iain Walker, technical sales manager for the Middle East.