Road widening means bridge demolition

Two heavy Atlas Copco hydraulic breakers have been used to demolish a bridge on the A40 autobahn at Junction 28 in Gelsenkirchen-Süd, Germany. The bridge was used to carry the four lanes of the A40 over the B277 main road. As the key route in the Ruhr district, the A40 is being widened to incorporate six lanes, so the old bridge needed to be demolished.
February 24, 2012 Read time: 2 mins
Two heavy 161 Atlas Copco hydraulic breakers have been used to demolish a bridge on the A40 autobahn at Junction 28 in Gelsenkirchen-Süd, Germany. The bridge was used to carry the four lanes of the A40 over the B277 main road. As the key route in the Ruhr district, the A40 is being widened to incorporate six lanes, so the old bridge needed to be demolished.

Viersen-based Prangenberg & Zaum had only two days to complete the demolition, commissioned by 945 Strabag. The contractor has a number of Atlas Copco breakers in its fleet and opted to use heavy-duty hammers from the firm for the demolition work, a 7tonne HB7000, a 5.8tonne HB5800 and a 2.5tonne HB2500. Using these tools the solid reinforced concrete bridge and bridge heads were removed in about 32 hours. A pulveriser crushed the demolition waste while it was still on site and the waste was then transferred to Prangenberg & Zaum's recycling station for further processing. The total volume of the demolition project was 2,300m3 of concrete with steel reinforcement and the breakers performed reliably while carrying out the work.

The A40 runs from Straelen on the Dutch border, over the Rhine and across the Ruhr region to Dortmund and is the main arterial road in the Ruhr. Around 120,000 vehicles/day travel around the city of Bochum at peak times, meaning the A40 carries the heaviest traffic in the Ruhr region.

Work on gradually widening the motorway to six lanes was begun in 2010 and should be completed in 2012.
Road Structures

For more information on companies in this article

Related Content

  • Rockster crushers help Austrian company Polixmair boost efficiency
    July 7, 2016
    "Greater flexibility, higher performance, faster implementation of large projects," is how Ferdinand Polixmair described the challenges of the increasingly fast-moving mineral processing business. "We can handle up to four major projects in parallel,” explained company owner Ferdinand Polixmair, whose company in Gmunden in upper Austdria has eight employees. “We have the team and the machines available. Moreover, we have no regional restrictions, we cover the whole of Austria." Polixmair had two of
    Read More
  • Drilling rig meets the utility supply challenge
    April 11, 2012
    A tricky utility supply project has been carried out in difficult conditions in Germany, without disturbing a village access road. The drilling work for the project was operated by boring contractor Beermann and the site was located on a plateau some 5km from the nearest village.
    Read More
  • Drilling rig meets the utility supply challenge
    May 9, 2012
    A tricky utility supply project has been carried out in difficult conditions in Germany, without disturbing a village access road. The drilling work for the project was operated by boring contractor Beermann and the site was located on a plateau some 5km from the nearest village.
    Read More
  • CECE sets up new group for hydraulic attachments
    February 25, 2014
    The European Construction Equipment Committee, CECE, has broadened its portfolio with the formation of a new body. It has recently established a new product group for hydraulic attachment tools. The body serves as a communication and information platform for companies operating in this business segment, including companies such as Arden Equipment, Atlas Copco, Caterpillar, FRD, Indeco, Montabert, NPK, Okada, Sandvik, Simex, Socomec, Soosan, Tabe, Toku and VTN. The product group is chaired by Torsten Ahr,
    Read More

Highlighted Content