Piling rig performs in difficult conditions

Specialist contractor Implenia Bau recently carried out some piling work for main contractor Keller Bauunternehmung on a project at Rorsach in Switzerland.
February 28, 2012 Read time: 1 min
A powerful Liebherr rotary piling rig was able to carry out a tricky construction project in Rorschach next to a key road link
Specialist contractor 2552 Implenia Bau recently carried out some piling work for main contractor 3317 Keller Bauunternehmung on a project at Rorsach in Switzerland.
 The work involved the construction of a secant pile wall as part of a project to build the Raiffeisenbank, located next to a key road. The company opted to use a 718 Liebherr LB28 piling rig equipped with a DBA200 rotary head. The specifications required the installation of 3,000 linear metres of piles to form a secant drilled pile wall within 10 weeks. The 225 piles measure from 12-16m with diameters of 700mm. The whole construction project lasted 4 months in total. The secant pile wall was built using a DBA200 double rotary head delivering a torque of up to 200kNm at the drill casing and 100kNm at the auger. The drill casing and auger were drilled out in one working cycle, with concreting carried out as the drilling equipment was removed and the reinforcement placed later.
Road Structures

For more information on companies in this article

Related Content

  • Bridge project uses high performing formwork
    February 20, 2012
    Doka designed and supplied a high-performing formwork technology solution for a challenging bridge project south of the German town of Halle. The 8,614m long single-cell box girder superstructure of the Saale-Elster Viaduct, with a typical cross section width of 13.9m, is borne on 220 piers, and has a constructional depth of 4m. It is mainly being erected on launching girders to minimise the impact on flora and fauna.
    Read More
  • Bridge formwork solutions complete big bridge picture
    July 2, 2014
    Advanced bridge formwork solutions are allowing contractors to complete vital major highway infrastructure projects covering Norway, Sweden, Estonia and Poland. Guy Woodford reports Building the Labbdalen bridges in Norway is a key feature of the E6 highway improvement programme. Main project contractor HÆHRE tasked RMD Kwikform and Teknikk with supplying a complete formwork and shoring solution that could tackle the challenging Norwegian terrain, whilst preserving the environment. Situated two hours
    Read More
  • Chinese-built Liebherr excavators
    February 8, 2018
    The first Chinese-built Liebherr R 922 crawler excavators for low regulated markets are now operating in China. The firm has developed three machines weighing from 20-25 tonnes specifically for customers in low regulated markets. The R 922 crawler excavator sits in the middle of this three-model range, which also includes the R 920 and R 924, and one of the first units from the series is being used for earthmoving work in China. The machine meets the Stage IIIA/ Tier 3/CHINA III emissions, which allows it
    Read More
  • Indeco cuts up New York City’s old Kosciuszko Bridge
    November 23, 2017
    An Indeco ISS 45/90 is proving essential for demolishing the old Kosciuszko Bridge in New York City. New York City’s old 1.9km Kosciuszko Bridge, which crosses Newtown Creek connecting Green Point, Brooklyn with Maspeth, Queens, has been out of service since April. By the end of the year, the polygonal Warren through-truss structure will be no more. To replace the old bridge, in 2009, the New York State Department of Transportation planned the construction of two cable-stayed replacement bridges.
    Read More

Highlighted Content