Skip to main content

Norway’s Beitstad Bridge opens

Norway has officially opened the Beitstad Bridge over the Beitstad Sund, between the towns of Steinkjer and Verran in Nord-Trøndelag County.
June 22, 2020 Read time: 2 mins
Sarens barged the bridge segments from Malm to the construction site (photo courtesy Sarens)

The 580m-long steel-concrete composite bridge, constructed by China’s Sichuan Road and Bridge Group (SRBG), is part of Norway’s County Roads 17 and 720. The company won the contract through an open tender and finished the project in 26 months.

Last September, heavy lifting specialist Sarens finished installing six pre-assembled bridge segments, varying between 40-150m long and up to 15m wide. The segments weighed between 130-780tonnes. Sarens barged the bridge segments from Malm to the construction site, a distance of about 5km. The crew also used a 24-axle SPMT (self-propelled modular transporter from Mammoet), a Kobelco hydraulic CKE-2500 crawler crane and a Terex-Demag CC8800-1 crawler crane. The CC8800-1 had a capacity of 1,600tonnes and was fitted onto the barge to perform all heavy lifts.

Sarens said that this was the first time a CC8800-1 crane had been used to install bridge elements from a Sarens barge. It was loaded onto a barge in Gent, Belgium, and towed to Malm in Norway by tugboat - an eight-day voyage. The crane was then configured in SSL MB 84m configuration for the first four lifts and the main boom was lengthened to 120m for the last two elements.

The crew lifted the first segment on day one and the sixth and final segment on day 14 – a two-week time frame set by the client, according to Joost Elsen, Sarens operations head who oversaw the work. “Challenges for the lifting were for once not the movement of the crane, but the exact positioning of the barge as we intended to minimise crane movements to only boom up and down to the installation radius.”

Main contractor SRBG says that its expertise lies in construction of deepwater long-span bridges, highway pavements and extra-long tunnels. Much of the company’s management team for the Beitstad Bridge came from the recently completed Halogaland Suspension Bridge, 200km north of the Arctic Circle. The Halogaland Bridge crosses the Rombaksfjorden in Narvik Municipality in Nordland County. Construction began in February 2013 and finished in December 2018 when it opened to traffic.

For more information on companies in this article

Related Content

  • The Mersey Gateway bridge project continues on schedule
    October 18, 2016
    Work continues on the 2.3km Mersey Gateway signature bridge project close to Liverpool in the UK. David Arminas reports on some of the construction highlights. Under construction is a cable-stayed structure with three towers that will span the Mersey River’s expansive mud flats between the towns of Runcorn and Widnes near Liverpool. Including the approach viaducts on each side, it will be 2.3km long with a river span of 1km. The main bridge deck will be reinforced concrete. The 80m-high central tower will b
  • Terex continues to develop crane range with new 55tonner
    January 6, 2017
    According to Terex its new Powerlift 1000 crawler crane features a compact design and claimed best-in-class reach and lifting capacity. It is built in Terex’s Jinan factory and is aimed at lifting contractors throughout China, Russia and India. The Powerlift 1000 has a maximum 55tonne lifting capacity and 203.5mt load moment, combined with a 55m main boom and a maximum 61m system length. It can be fitted with 6, 9, 12 or 15m fixed jibs.
  • Terex continues to develop crane range with new 55tonner
    November 27, 2012
    According to Terex its new Powerlift 1000 crawler crane features a compact design and claimed best-in-class reach and lifting capacity. It is built in Terex’s Jinan factory and is aimed at lifting contractors throughout China, Russia and India. The Powerlift 1000 has a maximum 55tonne lifting capacity and 203.5mt load moment, combined with a 55m main boom and a maximum 61m system length. It can be fitted with 6, 9, 12 or 15m fixed jibs.
  • All-terrain crane additions to ILC fleet
    May 18, 2018
    A key logistics provider in the Middle East, Integrated Logistics Company (ILC), has bought the first two Demag AC 300-6 all-terrain cranes from Terex Cranes. ILC says that it plans to put the cranes to work at several jobsites throughout the Gulf region. The new six-axle Demag AC 300-6 all-terrain crane offers a 300tonne maximum lifting capacity and features an 80m main boom. This new six-axle Demag all terrain crane is said to offer versatility needed for carrying out demanding jobs for lower operational