Manitowoc crane helps construct new Illinois bridge

A barge-mounted crane from Manitowoc is playing a key role in a major Illinois bridge replacement project. The machine is being used by Kraemer North America, which is replacing an 84-year-old truss bridge near Savanna, Illinois. The firm is employing a barge-mounted MLC300 equipped with the sophisticated variable position counterweight (VPC) technology, which is said to allow the MLC300 to adjust its counterweight during each lift and keep the barge stable while lifting. When Manitowoc introduced its VPC
December 15, 2017 Read time: 3 mins
A barge-mounted crane from Manitowoc is playing a key role in a major Illinois bridge replacement project. The machine is being used by Kraemer North America, which is replacing an 84-year-old truss bridge near Savanna, Illinois.
A barge-mounted crane from 2123 Manitowoc is playing a key role in a major Illinois bridge replacement project. The machine is being used by Kraemer North America, which is replacing an 84-year-old truss bridge near Savanna, Illinois.


The firm is employing a barge-mounted MLC300 equipped with the sophisticated variable position counterweight (VPC) technology, which is said to allow the MLC300 to adjust its counterweight during each lift and keep the barge stable while lifting. When Manitowoc introduced its VPC system, one of the important selling points was the crane’s barge capabilities. The reduced footprint and floating counterweight better suits the machine to barge-mounting. Contracting teams can fit the crane onto smaller barges as the machine adjusts its centre of gravity for each lift.

The job is to replace the 756.6m-long Savanna-Sabula Bridge and the Illinois DOT hired the Plain, Wisconsin-based company to construct the new bridge. Spanning the Mississippi River between Savanna and the island community of Sabula, Iowa, the project involves the construction of two 300.4m-long outer plate girder spans and a central 166.4m-long tied-arch span. During planning, Kraemer realised that a barge-mounted crane solution would be necessary to access the lifts for the tied-arch span.

The company sought consultation from Dawes Rigging & Crane Rental (Dawes) about a crane that could be mounted on the tight working quarters of a barge, but still provide high-capacity lifting.

Milwaukee-based Dawes suggested a crane that could automatically adjust its counterweight to provide greater stability for each lift but with a smaller footprint than earlier cranes. The MLC300 was selected for the job and is now erected on a barge measuring 21.3m by 59.4m in the Mississippi River. It is lifting 68.5tonne arch rib sections to a height of 50.3m using 89.9m of main boom, all from a 30.5m radius. To meet the lift radius and pick weight requirements on the job, Kraemer’s MLC300 had to be outfitted with its optional VPC-MAX attachment, which enhances the crane’s capacity and enables additional boom and jib length combinations.

Kraemer rented the MLC300 from Dawes Rigging & Crane Rental, a member of the ALL Family of Companies.

Construction of the $80 million Savanna-Sabula Bridge replacement began in March of 2017 and is on schedule for completion in 2018. The new bridge will span 750.7m in length and will meet modern-day deck-width standards to improve the flow of two-lane traffic.

Road Structures

For more information on companies in this article

Related Content

  • Manitowoc’s Potain MR418 luffing jib crane comes to Europe
    January 6, 2017
    From Manitowoc’s top-slewing line, the company will introduce to Europe its Potain MR418 luffing jib crane. Both the MR418 and MDT389 are notable for their capacity and size, which allow contractors to make significant cost and time savings on projects. With a maximum capacity of 24tonnes, the MR418 is one of the largest luffing jib cranes from Potain. While the MDT 389, with a 16tonne maximum capacity, is the largest crane in the new CCS topless range. The MDT219 is the largest model in the new MDT C
    Read More
  • Terex Superlift 3800 crane rises to the challenge in Alsace
    May 14, 2015
    Crane service provider Sarens has used a Terex Superlift 3800 lattice boom crawler crane to lift a pedestrian and bicycle steel bridge over the A4 Autoroute near Schiltigheim, in the Aisace region of France. The job was out of the ordinary, according to the Sarens Group, a transport and specialised rigging specialist based in Wolvertem, Belgium. “We didn’t have a special permit for a heavy-load transport with the required weight,” said Sarens project manager Joost Elsen.
    Read More
  • Toggenburger takes two Terex cranes to tackle a Swiss tandem lift
    August 21, 2015
    Two of the largest cranes in Switzerland recently were called upon to lift an 884tonne, 162m-long connecting bridge between two buildings at the Coop distribution centre in Schafisheim. “The individual bridge components had enormous gross weights of up to 275tonnes and required us to use working radii of up to 29m,” said Andre Huber, project manager at Toggenburger, the company that took on the task. To get the job done, Toggenburger rolled out its biggest machinery which also happen to be the two lar
    Read More
  • New bridge over China’s Yi River
    December 10, 2015
    A new bridge has been built in China that now spans the Yi River. A crane from XCMG has played a key role in the work, being used to erect the two 100m-high towers for the structure. The bridge is made from prestressed concrete and is a cable-stayed structure, with two towers providing support for the necessary cables. Building this large bridge required the use of sophisticated technology and the project team opted to use a 100m-high tower crane to help lift key elements of the structure into place. The c
    Read More

Highlighted Content