Manitowoc crane helps construct new Illinois bridge

A barge-mounted crane from Manitowoc is playing a key role in a major Illinois bridge replacement project. The machine is being used by Kraemer North America, which is replacing an 84-year-old truss bridge near Savanna, Illinois. The firm is employing a barge-mounted MLC300 equipped with the sophisticated variable position counterweight (VPC) technology, which is said to allow the MLC300 to adjust its counterweight during each lift and keep the barge stable while lifting. When Manitowoc introduced its VPC
December 15, 2017 Read time: 3 mins
A barge-mounted crane from Manitowoc is playing a key role in a major Illinois bridge replacement project. The machine is being used by Kraemer North America, which is replacing an 84-year-old truss bridge near Savanna, Illinois.
A barge-mounted crane from 2123 Manitowoc is playing a key role in a major Illinois bridge replacement project. The machine is being used by Kraemer North America, which is replacing an 84-year-old truss bridge near Savanna, Illinois.


The firm is employing a barge-mounted MLC300 equipped with the sophisticated variable position counterweight (VPC) technology, which is said to allow the MLC300 to adjust its counterweight during each lift and keep the barge stable while lifting. When Manitowoc introduced its VPC system, one of the important selling points was the crane’s barge capabilities. The reduced footprint and floating counterweight better suits the machine to barge-mounting. Contracting teams can fit the crane onto smaller barges as the machine adjusts its centre of gravity for each lift.

The job is to replace the 756.6m-long Savanna-Sabula Bridge and the Illinois DOT hired the Plain, Wisconsin-based company to construct the new bridge. Spanning the Mississippi River between Savanna and the island community of Sabula, Iowa, the project involves the construction of two 300.4m-long outer plate girder spans and a central 166.4m-long tied-arch span. During planning, Kraemer realised that a barge-mounted crane solution would be necessary to access the lifts for the tied-arch span.

The company sought consultation from Dawes Rigging & Crane Rental (Dawes) about a crane that could be mounted on the tight working quarters of a barge, but still provide high-capacity lifting.

Milwaukee-based Dawes suggested a crane that could automatically adjust its counterweight to provide greater stability for each lift but with a smaller footprint than earlier cranes. The MLC300 was selected for the job and is now erected on a barge measuring 21.3m by 59.4m in the Mississippi River. It is lifting 68.5tonne arch rib sections to a height of 50.3m using 89.9m of main boom, all from a 30.5m radius. To meet the lift radius and pick weight requirements on the job, Kraemer’s MLC300 had to be outfitted with its optional VPC-MAX attachment, which enhances the crane’s capacity and enables additional boom and jib length combinations.

Kraemer rented the MLC300 from Dawes Rigging & Crane Rental, a member of the ALL Family of Companies.

Construction of the $80 million Savanna-Sabula Bridge replacement began in March of 2017 and is on schedule for completion in 2018. The new bridge will span 750.7m in length and will meet modern-day deck-width standards to improve the flow of two-lane traffic.

Road Structures

For more information on companies in this article

Related Content

  • Bridge lift in Orlando for interstate rebuild
    July 4, 2019
    Measuring 33.8km long and costing US$2.3 billion, Orlando’s massive I-4 Ultimate is the largest infrastructure project in the Florida Department of Transportation’s history. Divided into four phases, the project requires major bridge work to improve traffic flow through Central Florida. In all, 13 existing structures are being widened, 53 new bridges added and 74 bridges replaced. Area 2, currently under construction, runs through Orlando from Highway 50 at the northern edge to the Highway 423/I-4 interc
    Read More
  • Crane versatility helps with bridge building
    August 14, 2014
    The versatility and mobility of a Terex crawler crane has helped enormously with the construction of a new road bridge in Luxemburg. The Terex Superlift 3800 lattice boom crawler crane owned by Trier-based Steil Kranarbeiten was used to build a bridge in Luxemburg only two days after the same machine was used on a job in the Hunsrück mountain range. The machine was needed to lift a 440m long bridge across a valley, connecting a new section of highway.
    Read More
  • Super job for a Demag CC 3800-1 without a Superlift counterweight
    July 4, 2019
    A Demag CC 3800-1 crane with an 84m-long main boom was recently set up in Germany without a Superlift counterweight to save space. The jobsite was the replacement of the old viaduct on the A45 Freeway that spans the Lahn River near Dorlar in Germany. Bietigheim-Bissingen-based crane service provider Wiesbauer solved the site’s space issues by using a Demag CC 3800-1. “This site required us to lift loads of 96-148tonnes at radii of 40-64m, so there was no option but to use a crawler crane in the 650tonne c
    Read More
  • New German autobahn bridge under constriuction
    May 1, 2015
    Crane manufacturer Manitowoc has supplied six Potain cranes to German contractor Max Bögl. These machines are being used for constructing a new bridge carrying the A3 autobahn, close to Limburg. Working at over 70m high, the cranes tower over the Lahn Valley. The cranes for this project were supplied by Max Bögl’s subsidiary, Max Bögl Transport & Geräte. The three topless Potain MDT 222 cranes were selected for the work as they feature tip heights of up to 76.2m and can operate with a working radius of
    Read More

Highlighted Content