Maintaining bridges in Thailand with inspection machines

New machines from Italian supplier Barin are now being used to help maintain bridges in Thailand. The Department of Rural Roads ordered one of the Barin AB range of bridge inspection machines for use by its Bridge Construction Bureau. This machine was installed on a suitable truck chassis to cope with the 24tonne GVW and as with other units in the Barin range, is able to operate from a single lane. The AB 13/S unit offers a bridge barrier clearance height of 3.6m and a sidewalk clearance of 3.2m. Ho
June 9, 2015 Read time: 1 min
The Barin bridge inspection machine will be used in Thailand for maintenance purposes
New machines from Italian supplier 1481 Barin are now being used to help maintain bridges in Thailand. The Department of Rural Roads ordered one of the Barin AB range of bridge inspection machines for use by its Bridge Construction Bureau.

This machine was installed on a suitable truck chassis to cope with the 24tonne GVW and as with other units in the Barin range, is able to operate from a single lane.

The AB 13/S unit offers a bridge barrier clearance height of 3.6m and a sidewalk clearance of 3.2m. Horizontal outreach under the bridge is 14.5m, while the maximum vertical depth the unit can reach under the bridge deck is 19m. Maximum overhead outreach is 16.7m while it has a bucket capacity of 250kg.

Road Structures

For more information on companies in this article

Related Content

  • Magni introduces the RTH 8.25 and RTH 6.46 SH telehandlers
    April 25, 2018
    Magni Telescopic Handlers has introduced the RTH 8.25 SH rotating telescopic handler, which it claims has a higher capacity than any similar machine in the world. Built on the chassis of its 35/39 models, but with major structural components reinforced for strength, the machine can lift 5.3 tonnes at 25m height and 1 tonne at 21m reach. The RTH 8.25 SH, which weighs 24 tonnes, is aimed at the construction and maintenance markets.
    Read More
  • Keestrack crushing in all performance levels
    March 2, 2016
    With transport weights of less than 30tonnes are the jaw crusher Keestrack B2 (former Argo), with a jaw width of 1,000mm, and the crusher unit Keestrack R4 (former Destroyer 1011) with add-on screener and oversize material recycler. This also applies to the Keestrack R8 top crusher unit (former Destroyer 1313), that is presented as a highly productive mobile solution in the output range of 450tonnes/hour. “As is the case for all Keestrack crusher units, the heavy construction of the 1,250mm wide roto
    Read More
  • Keestrack crushing in all performance levels
    January 6, 2017
    With transport weights of less than 30tonnes are the jaw crusher Keestrack B2 (former Argo), with a jaw width of 1,000mm, and the crusher unit Keestrack R4 (former Destroyer 1011) with add-on screener and oversize material recycler. This also applies to the Keestrack R8 top crusher unit (former Destroyer 1313), that is presented as a highly productive mobile solution in the output range of 450tonnes/hour. “As is the case for all Keestrack crusher units, the heavy construction of the 1,250mm wide roto
    Read More
  • Innovations in crushing and screening technology boosting efficiency
    July 15, 2015
    The crushing and screening sector has seen a flurry of new model launches in recent months, with a series of new equipment introductions - Mike Woof writes. Crushing and screening systems play a vital role in the overall cost effectiveness of a quarrying operation. Ensuring that a quarry runs efficiently relies heavily on the appropriateness of the entire crushing and screening set-up for the material input, the output grades and the compatibility of each separate unit. Mobility has been a key issue in rece
    Read More

Highlighted Content