Bridge improvements reduce flood threat

The impact of the new Eden Bridge over the River Eden on its flood plain is a key issue to the construction of the Carlisle Northern Development Route (CNDR).
February 16, 2012 Read time: 2 mins
A corrugated steel system from Tubosider UK was used for the culverts
The impact of the new Eden Bridge over the River Eden on its flood plain is a key issue to the construction of the Carlisle Northern Development Route (CNDR). The new 8.25km road is being built west of the city following the flooding of Carlisle in north-west England in 2005, and increased flood risk generally, The local study carried out by the 2759 Environment Agency in the wake of the 2005 floods recommended lowering the flood bank downstream by 1m and removing an old railway embankment to mitigate the future threat to Carlisle but placing added importance on the Eden plain's topography.

As a result of the flood modelling work carried out by 2762 Capita Symonds, the technical adviser managing the project for Cumbria County Council, the plan for the new bridge's northern embankment called for a series of culverts with a combined cross section of 160m².

Although the illustrative drawing featured a concrete hatched structure, design engineers Scott Wilson recommended the greater practicality and easier installation of a corrugated steel system as manufactured by 2580 Tubosider UK, also the providers of the most economical solution.

"Tubosider's bolted plate is 2309 Highways Agency-approved, sufficient to gain approval, and using its detailed plans for assembling each prefabricated component, all 15 culverts are now in place. The final solution was for ten large diameter structures of 6mm thickness and then five smaller ones of 4mm, all ranging in span from 3.32-4.46m.

It's a system 1486 Birse Civils has often used before," said design manager Bob Gibson of Birse Civils, contractors for the design and construction of the new road.

Due to open in early 2012, the CNDR will run from the A595 to M6 Junction 44 and is a £176 million (e200 million) public private partnership (PPP) concession contract run for Cumbria County Council by 1146 Balfour Beatty through its wholly-owned subsidiary Connect Roads. It will take traffic away from Carlisle centre and improve links between west Cumbria, Scotland and the north-east of England. As winning bidder, Balfour Beatty also takes control of 150km of existing road network and will maintain this for a period of 30 years.
Road Structures

For more information on companies in this article

Related Content

  • ACO curbs the rain
    November 20, 2023

    ACO says its KerbDrain CycleKerb drainage solution for bike lanes in England meets LTN 1/20 standards while making travel safer for all cycle lane users.

    Local Transport Note 1/20 (LTN 1/20) sets out minimum standards for English local authorities and highway engineers when implementing new cycle infrastructure. It includes, but is not limited to, cycle crossings and junctions, cycle lanes, cycle tracks, cycle networks and cycle parking.

    Read More
  • Storstrom Bridge to be Denmark’s third longest
    March 8, 2018
    Form and functionality come together in Denmark’s latest Storstrom Bridge design. David Arminas reports. An Italian joint venture recently won the construction contract for what will be one of Denmark’s longest bridges, the replacement 4km-long road and rail Storstrom Bridge. The Danish Road Directorate - Vejdirektoratet - awarded the work to a joint venture of Condotte and Grandi Lavori Fincosit along with bridge design consultant Seteco Ingegneria as a subcontractor. Estimated cost is around €550 milli
    Read More
  • The UK’s Humber Bridge gets protected status
    July 28, 2017
    Any refurbishments to the Humber Bridge near the northern English city of Hull will be subject to intense scrutiny after being designated a historic site. The bridge - only 36-years old – was the longest single-span suspension bridge for 16 years until it was surpassed in 1998 with completion of Japan’s Akashi Kaikyō Bridge with a main span of 1.9km. The Humber Bridge now ranks eighth-longest as measured by its main span of 1.4km. Historic England, the listed structures designating authority, described the
    Read More
  • Bolivia’s new highway
    October 10, 2017
    Bolivia’s new highway will provide better access into mountain areas – Mauro Nogarin writes At the beginning of 2015, work began on the construction and paving for the Tupiza - Atocha - Uyuni highway project. The route is located in Bolivia’s Potosí department: it is 189m in length and forms part of the Southwest Basic Road Network (RVF) of Bolivia.
    Read More

Highlighted Content